VOLVO
SAS-U300096 - Control Module. Component Failures. Component internal failure
System
Lenkwinkelsensor (SAS)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
4 ModelleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Modelle nach Baujahr und Motor anzeigen (8)
- Volvo C30 (2007–2013)2011Nur Motor: D4162T, D4164T, D5204T, D5204T5
- Volvo C30 (2007–2013)2012–2013Nur Motor: D4162T, D5204T, D5204T5
- Volvo C70 (2006–2013)2011Nur Motor: D5204T, D5204T5
- Volvo C70 (2006–2013)2012–2013Alle Motoren außer: B5254T7
- Volvo S40 (2004–2013)2011Nur Motor: D4162T, D4164T, D5204T, D5204T5
- Volvo S40 (2004–2013)2012Nur Motor: D4162T, D5204T, D5204T5
- Volvo V50 (2004–2013)2011Nur Motor: D4162T, D4164T, D5204T, D5204T5
- Volvo V50 (2004–2013)2012Nur Motor: D4162T, D5204T, D5204T5
Was bedeutet der Fehlercode?
The steering angle sensor checks its own internal components. The code is set when it detects that one of them is not working, which is caused by an internal fault in the sensor.
Mögliche Ursachen
- Internal malfunction within the steering angle sensor (SAS).
Was Sie tun können
- 1Switch off the ignition, wait a while and start the engine. Check whether the code is still stored, clear it and test drive the car.
- 2If the fault is permanent, the steering angle sensor must be replaced. A workshop does this.
- 3The angle sensor is part of the anti-spin and stability system. Have a workshop diagnose and replace it rather than working on the steering wheel yourself.
Symptome, die Sie bemerken können4
- A yellow warning symbol and text message show in the display
- The anti-spin and anti-skid warning lamp lights up or behaves abnormally
- The anti-spin function does not work
- The stability function does not work
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.