VOLVO
SODL-U003755 - Vehicle Communication Bus B. System Programming Failures. Not configured
System
Totwinkel-Sensor links (SODL)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
6 ModelleS60 (2011–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), XC60 (2009–)
Was bedeutet der Fehlercode?
The left or right module checks its configuration ID against the signal setup that the CEM sends over CAN. The code is set when the IDs do not match, which is caused by the module not being intended for this car, for example a used module with different software or hardware.
Mögliche Ursachen
- Incorrect configuration ID, because the module is not meant for this car, for example a used module with different software or hardware.
Was Sie tun können
- 1If a used control module for the left or right side has been fitted, check that it is intended for your car.
- 2Have a workshop reprogram the left and right side control modules with the latest software, both at the same time.
- 3If either control module has been replaced, a workshop must calibrate both of them.
Symptome, die Sie bemerken können3
- Blind-spot monitoring (BLIS) is not working
- Rear cross-traffic alert (CTA) is not working
- A yellow warning symbol and text message show in the display
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.