Was bedeutet der Fehlercode SODR-U210053?

Diagnose und Fehlercodedefinition für SODR-U210053 (Volvo S60 (2011–), Volvo V40 (2013–), Volvo V40 Cross Country (2013–)). Steuergerätereparatur bei OBD Tuning.

VOLVO

SODR-U210053 - Initial Configuration Not Complete. System Programming Failures. Deactivated

System

Totwinkel-Sensor rechts (SODR)

Volvo-Modelle, für die dieser Fehlercode gilt

Gilt für folgende Modelle:

6 Modelle

S60 (2011–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), XC60 (2009–)

Modelle nach Baujahr und Motor anzeigen (6)

Was bedeutet der Fehlercode?

The calibration data for the side modules has been lost, so a new calibration is needed before the LCMA and CTA functions can work again; LCMA is the lane change merge aid. The code is set when the calibration is no longer valid.

Mögliche Ursachen

Lost calibration

Was Sie tun können

1Have a workshop calibrate the SODL and SODR; this is a workshop job
2Before calibration, make sure the area around the side modules, that is the rear bumper, is clean and free of dirt, ice and water
3After calibration, check that the blind spot and reversing cross traffic systems work as they should

Symptome, die Sie bemerken können3

Blind spot warning (BLIS) stops working
Cross traffic alert (CTA) does not work
Yellow warning symbol and message in the display

Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.