VOLVO
SRS-00E9 - Driver's seat belt (inertia) reel sensor. Communication fault
System
Airbagsystem (SRS)
Volvo-Modelle, für die dieser Fehlercode gilt
Dieser Fehlercode hat je nach Modell, Modelljahr oder Motor unterschiedliche Bedeutungen. Wählen Sie die Bedeutung, die für Ihr Fahrzeug gilt.
Gilt für folgende Modelle:
4 ModelleC30 (2007–2013), C30 Electric (2011–2013), S40 (2004–2013), V50 (2004–2013)
Modelle nach Baujahr und Motor anzeigen (4)
Was bedeutet der Fehlercode?
The SRS control module has registered faulty communication on the signal line to the driver's seat belt reel sensor for a longer period. The reel sensor sits in the same unit as the belt tensioner, so the control module cannot read its signal and the SRS warning appears.
Mögliche Ursachen
- Broken wire or poor contact in the signal line or the plugs between the SRS module and the reel sensor
- Open circuit in the driver's seat belt reel sensor
- Damaged reel sensor, so communication with the control module fails
Was Sie tun können
- 1Read the fault code with diagnostic equipment and note whether it is permanent or intermittent
- 2Have a workshop check that the connector at the driver's seat belt reel sensor is secure and free from corrosion
- 3Have a workshop check chafing or pinch damage on the cable to the reel sensor
- 4Have a workshop check the signal cable to the SRS control module, as it is part of the airbag system
- 5If no fault is found, the reel sensor is what needs replacing; it sits in the same unit as the belt tensioner, so a workshop replaces both
- 6Do not work on the airbag system or the belt tensioner yourself; have a workshop check it
Symptome, die Sie bemerken können2
- The general warning lamp lights
- An SRS warning message is displayed
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.