VOLVO
SRS-C006A54 - Multi-axis Acceleration Sensor. System Programming Failures. Missing calibration
System
Airbagsystem (SRS)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
2 ModelleV40 (2013–), V40 Cross Country (2013–)
Modelle nach Baujahr und Motor anzeigen (2)
Was bedeutet der Fehlercode?
The supplemental restraint system control module does not have a valid calibration of the inertial measurement unit (IMU). This means the calibration is either missing or incorrect, and the fault stays set until a valid calibration has been carried out.
Mögliche Ursachen
- The inertial measurement unit (IMU) has incorrect calibration or no calibration
Was Sie tun können
- 1Have a workshop calibrate the inertial measurement unit (IMU), with the car standing still on level ground
- 2After calibration the text message should clear and the SRS warning light should go out a short while after the ignition is switched on
- 3If SRS-C006A28 or SRS-C006A54 is still present after calibration, the calibration has failed and must be redone
- 4Have the workshop also calibrate the brake control module (BCM) once the sensor is done, so its functions work without faults
- 5Do not work on the airbag system yourself; have a workshop check it if the fault remains after calibration
Symptome, die Sie bemerken können2
- Text message in the instrument cluster
- The SRS warning light comes on or behaves abnormally
Was der Fehler beeinflussen kann2
- Other systems that use the accelerometer signals do not work fully
- The SRS functions still work without calibration
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.