Was bedeutet der Fehlercode SUM-0082?

Diagnose und Fehlercodedefinition für SUM-0082 (Volvo S60 (2001–2009), Volvo S60 (2001–2009), Volvo S80 (1999–2006)). Steuergerätereparatur bei OBD Tuning.

VOLVO

SUM-0082 - Supply, sensor. Signal too high

System

Aktives Fahrwerk (SUM)

Volvo-Modelle, für die dieser Fehlercode gilt

Gilt für folgende Modelle:

4 Modelle

S60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007)

Modelle nach Baujahr und Motor anzeigen (7)

Was bedeutet der Fehlercode?

The supply voltage to several of the suspension sensors is too high. The group consists of the front suspension acceleration sensors, the right rear position sensor and the body acceleration sensors. They share a common supply from the control module, so the fault may be in one sensor or in the control module.

Mögliche Ursachen

The supply wire to one of the sensors has contact with positive voltage
A break in the signal wire running from one of the sensors
Defective acceleration or position sensor
Defective control module

Was Sie tun können

1Read out the fault codes first, and repair and clear any codes for the acceleration or position sensors before you continue
2Use a multimeter to check that the signal cables from the sensors are not broken
3Use a multimeter to check that the power supply to the sensors has no contact with positive voltage
4If the wiring checks out, a sensor or the control module is probably defective. Have a workshop check this

Symptome, die Sie bemerken können3

The general warning lamp lights
Message in the display
Four-C does not work

Was der Fehler beeinflussen kann1

Four-C control is switched off

Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.