Was bedeutet der Fehlercode SUM-0127?

Diagnose und Fehlercodedefinition für SUM-0127 (Volvo S60 (2001–2009), Volvo S60 (2001–2009), Volvo S80 (1999–2006)). Steuergerätereparatur bei OBD Tuning.

VOLVO

SUM-0127 - Solenoid, suspension right front. Current too high

System

Aktives Fahrwerk (SUM)

Volvo-Modelle, für die dieser Fehlercode gilt

Gilt für folgende Modelle:

4 Modelle

S60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007)

Modelle nach Baujahr und Motor anzeigen (7)

Was bedeutet der Fehlercode?

The current from the solenoid at the right front wheel is too high. The fault may be caused by the power supply wire touching the signal wire from the solenoid, or by the signal wire having contact with voltage. The Four-C function is blocked.

Mögliche Ursachen

The power supply wire to the solenoid has contact with the signal wire from the solenoid
The signal wire from the solenoid has contact with voltage
Defective solenoid

Was Sie tun können

1Check the connectors at the solenoid at the right front and at the control module for oxidation
2Use a multimeter to check that the wires to the solenoid do not touch each other
3Use a multimeter to check that the signal wire from the solenoid has no contact with positive voltage
4Check that the suspension system fuses are intact; the owner's manual shows where they are
5If the wires are intact, have a workshop check the solenoid

Symptome, die Sie bemerken können3

The general warning lamp lights
Message in the display
Four-C does not work

Was der Fehler beeinflussen kann1

The Four-C function is blocked

Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.