VOLVO
SWM-0033 - Windshield wiper lever. Faulty signal
System
Lenkradmodul (SWM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
5 ModelleC30 (2007–2013), C30 Electric (2011–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Modelle nach Baujahr und Motor anzeigen (10)
- Volvo C30 (2007–2013)2007–2011
- Volvo C30 (2007–2013)2012Alle Motoren außer: D4162T, D5204T, D5204T5
- Volvo C30 (2007–2013)2013Nur Motor: B4204S3, B4204S4, B5254T7
- Volvo C30 Electric (2011–2013)2011–2013
- Volvo C70 (2006–2013)2006–2011
- Volvo C70 (2006–2013)2012–2013Nur Motor: B5254T7
- Volvo S40 (2004–2013)2004–2010
- Volvo S40 (2004–2013)2011–2012Alle Motoren außer: D4162T, D5204T, D5204T5
- Volvo V50 (2004–2013)2004–2010
- Volvo V50 (2004–2013)2011–2012Alle Motoren außer: D4162T, D5204T, D5204T5
Was bedeutet der Fehlercode?
A faulty signal was detected by the steering wheel module (SWM) while checking the intermittent windscreen wiper function. The cause may be a damaged switch for the intermittent wiper or an internal fault in the module. The windscreen wipers do not work as intended.
Mögliche Ursachen
- Damaged switch for the intermittent windscreen wiper
- Internal fault in the control module
Was Sie tun können
- 1Check that the windscreen wiper lever is securely fitted and not loose
- 2Check that the intermittent wiper switch does not stick or stay in the activated position
- 3If you have a diagnostic tool: read the switch position in live data and check that it follows when you select each mode
- 4If no fault is found, the lever can be replaced; if the fault returns, a workshop needs to replace the control module
Symptome, die Sie bemerken können1
- The windscreen wipers do not work
Was der Fehler beeinflussen kann1
- If the wipers are in an active position, they run at the lowest speed
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.