VOLVO
SWM-0201 - Steering wheel angle sensor. Faulty signal
System
Lenkradmodul (SWM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
5 ModelleC30 (2007–2013), C30 Electric (2011–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Modelle nach Baujahr und Motor anzeigen (10)
- Volvo C30 (2007–2013)2007–2011
- Volvo C30 (2007–2013)2012Alle Motoren außer: D4162T, D5204T, D5204T5
- Volvo C30 (2007–2013)2013Nur Motor: B4204S3, B4204S4, B5254T7
- Volvo C30 Electric (2011–2013)2011–2013
- Volvo C70 (2006–2013)2006–2011
- Volvo C70 (2006–2013)2012–2013Nur Motor: B5254T7
- Volvo S40 (2004–2013)2004–2010
- Volvo S40 (2004–2013)2011–2012Alle Motoren außer: D4162T, D5204T, D5204T5
- Volvo V50 (2004–2013)2004–2010
- Volvo V50 (2004–2013)2011–2012Alle Motoren außer: D4162T, D5204T, D5204T5
Was bedeutet der Fehlercode?
The steering wheel angle sensor, which sits in the steering wheel module (SWM) and counts the number of wheel turns, has logged a fault. The stability functions are switched off while it is present.
Mögliche Ursachen
- Fault in the steering wheel module (SWM) itself
Was Sie tun können
- 1Stability control is switched off while the fault is present, so drive carefully until it has been repaired
- 2Read and note the code, clear it and road test to see whether it returns
- 3If you have a diagnostic tool: read the steering wheel turn count in live data and check that it rises and falls as the wheel is turned in both directions
- 4If the fault returns, have a workshop replace the steering wheel module (SWM), since the angle sensor cannot be replaced separately
Symptome, die Sie bemerken können2
- Traction control warning lamp lit
- The stability control system does not function
Was der Fehler beeinflussen kann1
- Active yaw control (AYC) is blocked
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.