VOLVO
SWM-0203 - Steering wheel angle sensor. Faulty signal
System
Lenkradmodul (SWM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
5 ModelleC30 (2007–2013), C30 Electric (2011–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Modelle nach Baujahr und Motor anzeigen (10)
- Volvo C30 (2007–2013)2007–2011
- Volvo C30 (2007–2013)2012Alle Motoren außer: D4162T, D5204T, D5204T5
- Volvo C30 (2007–2013)2013Nur Motor: B4204S3, B4204S4, B5254T7
- Volvo C30 Electric (2011–2013)2011–2013
- Volvo C70 (2006–2013)2006–2011
- Volvo C70 (2006–2013)2012–2013Nur Motor: B5254T7
- Volvo S40 (2004–2013)2004–2010
- Volvo S40 (2004–2013)2011–2012Alle Motoren außer: D4162T, D5204T, D5204T5
- Volvo V50 (2004–2013)2004–2010
- Volvo V50 (2004–2013)2011–2012Alle Motoren außer: D4162T, D5204T, D5204T5
Was bedeutet der Fehlercode?
The steering wheel angle sensor has registered that the steering wheel is turned faster than the permitted value. This can happen when the front wheels have hit a curb or a stone. The stability functions are switched off while the fault is present.
Mögliche Ursachen
- The front wheels have hit a curb or a stone
Was Sie tun können
- 1Stability control is switched off while the fault is present, so drive carefully until it has been repaired
- 2Read and note the code, clear it and road test to see whether it returns
- 3Check the front wheels and suspension for visible damage after the impact with the curb or stone
- 4If you have a diagnostic tool: turn the steering wheel slowly from lock to lock and check in live data that the angle changes smoothly
- 5If the fault returns, have a workshop replace the steering wheel module (SWM), since the angle sensor cannot be replaced separately
Symptome, die Sie bemerken können2
- Traction control warning lamp lit
- The stability control system does not function
Was der Fehler beeinflussen kann1
- Active yaw control (AYC) is blocked
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.