VOLVO
SWM-0204 - Steering wheel angle sensor. Current too low
System
Lenkradmodul (SWM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
5 ModelleC30 (2007–2013), C30 Electric (2011–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Modelle nach Baujahr und Motor anzeigen (10)
- Volvo C30 (2007–2013)2007–2011
- Volvo C30 (2007–2013)2012Alle Motoren außer: D4162T, D5204T, D5204T5
- Volvo C30 (2007–2013)2013Nur Motor: B4204S3, B4204S4, B5254T7
- Volvo C30 Electric (2011–2013)2011–2013
- Volvo C70 (2006–2013)2006–2011
- Volvo C70 (2006–2013)2012–2013Nur Motor: B5254T7
- Volvo S40 (2004–2013)2004–2010
- Volvo S40 (2004–2013)2011–2012Alle Motoren außer: D4162T, D5204T, D5204T5
- Volvo V50 (2004–2013)2004–2010
- Volvo V50 (2004–2013)2011–2012Alle Motoren außer: D4162T, D5204T, D5204T5
Was bedeutet der Fehlercode?
The steering wheel angle sensor reads two code tracks with light diodes. The module (SWM) has logged that the current through the diode circuit is too low. The fault lies inside the module, and the stability functions are switched off while it is present.
Mögliche Ursachen
- Malfunction inside the steering wheel module (SWM)
Was Sie tun können
- 1Stability control is switched off while the fault is present, so drive carefully until it has been repaired
- 2Read and note the code, clear it and road test to see whether it returns
- 3If you have a diagnostic tool: follow the steering angle value in live data during a short drive and check that it does not freeze or jump
- 4If the fault returns, have a workshop replace the steering wheel module (SWM), since the angle sensor cannot be replaced separately
Symptome, die Sie bemerken können2
- Traction control warning lamp lit
- The stability control system does not function
Was der Fehler beeinflussen kann1
- Active yaw control (AYC) is blocked
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.