VOLVO
SWM-0A08 - Reset button. No function
System
Lenkradmodul (SWM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
5 ModelleC30 (2007–2013), C30 Electric (2011–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Modelle nach Baujahr und Motor anzeigen (10)
- Volvo C30 (2007–2013)2007–2011
- Volvo C30 (2007–2013)2012Alle Motoren außer: D4162T, D5204T, D5204T5
- Volvo C30 (2007–2013)2013Nur Motor: B4204S3, B4204S4, B5254T7
- Volvo C30 Electric (2011–2013)2011–2013
- Volvo C70 (2006–2013)2006–2011
- Volvo C70 (2006–2013)2012–2013Nur Motor: B5254T7
- Volvo S40 (2004–2013)2004–2010
- Volvo S40 (2004–2013)2011–2012Alle Motoren außer: D4162T, D5204T, D5204T5
- Volvo V50 (2004–2013)2004–2010
- Volvo V50 (2004–2013)2011–2012Alle Motoren außer: D4162T, D5204T, D5204T5
Was bedeutet der Fehlercode?
The steering wheel module (SWM) has registered that the car has no trip computer, yet the menu selector and reset button for one are fitted. The cause is an incorrect control stalk fitted on the left-hand side, and cruise control then does not work at all.
Mögliche Ursachen
- Incorrect control stalk fitted on the left-hand side
Was Sie tun können
- 1Check whether the control stalk or keypad has been replaced recently and that it is intended for this car
- 2If you have a diagnostic tool: read the buttons in live data and check whether any shows active without being pressed
- 3Have a workshop check that the correct control stalk is fitted
Symptome, die Sie bemerken können2
- No function for the trip computer
- Cruise control does not work at all
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.