TCM-0009
VOLVO
TCM-0009 - Shift solenoid S2. Signal too low
System
Getriebesteuergerät (TCM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
16 ModelleC30 (2007–2013), C70 (2006–2013), C70 Cabriolet (1998–2005), C70 Coupé (1998–2002), S40 (1996–2004), S40 (2004–2013), S60 (2001–2009), S70 (1997–2000), S80 (1999–2006), V40 (1996–2004), V50 (2004–2013), V70 (1997–2000), V70 (2000–2008), V70 XC (1998–2000), V70 XC / XC70 (2001–2007), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (39)
- Volvo C30 (2007–2013)2007–2013Nur Getriebe: AW55-50/51SN
- Volvo C70 (2006–2013)2006–2013Nur Getriebe: AW55-50/51SN
- Volvo C70 Cabriolet (1998–2005)1999Nur Getriebe: AW50-42
- Volvo C70 Cabriolet (1998–2005)2000Alle Getriebe außer: M56
- Volvo C70 Cabriolet (1998–2005)2001–2005Nur Getriebe: AW55-50/51SN
- Volvo C70 Coupé (1998–2002)1999Alle Motoren außer: B5254S DENSO · Nur Getriebe: AW50-42
- Volvo C70 Coupé (1998–2002)2000Alle Getriebe außer: M56
- Volvo C70 Coupé (1998–2002)2001–2002Nur Getriebe: AW55-50/51SN
- Volvo S40 (1996–2004)2001–2004
- Volvo S40 (2004–2013)2004, 2011–2012Nur Getriebe: AW55-50/51SN
- Volvo S40 (2004–2013)2005–2010Nur Getriebe: AW50/51 AWD, AW55-50/51SN
- Volvo S60 (2001–2009)2001–2002
- Volvo S60 (2001–2009)2003, 2009Alle Getriebe außer: M58
- Volvo S60 (2001–2009)2004–2005Nur Getriebe: AW50/51 AWD, AW55-50/51SN
- Volvo S60 (2001–2009)2006–2008Alle Getriebe außer: M58, M66 AWD
- Volvo S70 (1997–2000)1999Nur Getriebe: AW42 AWD, AW50-42
- Volvo S70 (1997–2000)2000Alle Getriebe außer: M56, M58
- Volvo S80 (1999–2006)1999–2004
- Volvo S80 (1999–2006)2005–2006Alle Getriebe außer: M56
- Volvo V40 (1996–2004)2001–2004
- Volvo V50 (2004–2013)2004, 2011–2012Nur Getriebe: AW55-50/51SN
- Volvo V50 (2004–2013)2005–2010Nur Getriebe: AW50/51 AWD, AW55-50/51SN
- Volvo V70 (1997–2000)1999Alle Motoren außer: B5202FS, B5252FS, D5252T MSA 15.7, GB5252S, GB5252S2 · Nur Getriebe: AW42 AWD, AW50-42
- Volvo V70 (1997–2000)2000Alle Getriebe außer: M56, M58
- Volvo V70 (2000–2008)2000–2002, 2008
- Volvo V70 (2000–2008)2003Alle Getriebe außer: M58
- Volvo V70 (2000–2008)2004–2005Nur Getriebe: AW50/51 AWD, AW55-50/51SN
- Volvo V70 (2000–2008)2006–2007Alle Getriebe außer: M58, M66 AWD
- Volvo V70 XC (1998–2000)1999Nur Motor: B5254T · Nur Getriebe: AW42 AWD
- Volvo V70 XC (1998–2000)2000Nur Getriebe: AW42 AWD
- Volvo V70 XC / XC70 (2001–2007)2001–2002
- Volvo V70 XC / XC70 (2001–2007)2003–2005Nur Getriebe: AW50/51 AWD
- Volvo V70 XC / XC70 (2001–2007)2006–2007Nur Getriebe: AW50/51 AWD, TF-80SC AWD
- Volvo XC90 (2003–)2003, 2012, 2015
- Volvo XC90 (2003–)2004, 2006, 2011Alle Getriebe außer: M66 AWD
- Volvo XC90 (2003–)2005Alle Getriebe außer: M66 AWD, TF-80SC AWD
- Volvo XC90 (2003–)2007Alle Getriebe außer: M66 AWD, TF-80SC
- Volvo XC90 (2003–)2008–2010Nur Getriebe: AW50/51 AWD, TF-80SC AWD
- Volvo XC90 (2003–)2013–2014Nur Getriebe: AW50/51 AWD
Was bedeutet der Fehlercode?
The control module has detected a signal that is too low on the wire for shift solenoid S2 while it is meant to be on, so the solenoid cannot be switched on. The signal can be too low when the signal wire is short-circuited to ground.
Mögliche Ursachen
- Signal wire short-circuited to ground
- Defective solenoid
- Internal fault in the control module
Was Sie tun können
- 1The fault can be caused by a faulty oil temperature sensor. With a diagnostic tool, follow the oil temperature in live data during a test drive and check that it rises
- 2Clear the fault code and road test the car
- 3If you have a diagnostic tool: activate solenoid S2 with the selector in position P and check in live data that the value switches between off and on
- 4Check that the connectors to the transmission and the control module are secure and free from corrosion
- 5If no short to ground is found in the wire, have a workshop check solenoid S2 and the control module
Symptome, die Sie bemerken können5
- The general orange warning lamp is lit
- The malfunction indicator lamp (MIL) is lit
- Gear shifts are harsh
- No gear shifts
- No lock-up function
Was der Fehler beeinflussen kann2
- Gear 5 is blocked
- The control module's emergency program (Limp-home) is activated
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.