TCM-0024
VOLVO
TCM-0024 - Transmission input speed sensor. Faulty signal. Intermittent fault
System
Getriebesteuergerät (TCM)
Volvo-Modelle, für die dieser Fehlercode gilt
Dieser Fehlercode hat je nach Modell, Modelljahr oder Motor unterschiedliche Bedeutungen. Wählen Sie die Bedeutung, die für Ihr Fahrzeug gilt.
Gilt für folgende Modelle:
10 ModelleC70 Cabriolet (1998–2005), C70 Coupé (1998–2002), S60 (2001–2009), S70 (1997–2000), S80 (1999–2006), V70 (1997–2000), V70 (2000–2008), V70 XC (1998–2000), V70 XC / XC70 (2001–2007), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (24)
- Volvo C70 Cabriolet (1998–2005)1999–2000Nur Getriebe: AW50-42
- Volvo C70 Coupé (1998–2002)1999Alle Motoren außer: B5254S DENSO · Nur Getriebe: AW50-42
- Volvo C70 Coupé (1998–2002)2000Nur Getriebe: AW50-42
- Volvo S60 (2001–2009)2001–2002
- Volvo S60 (2001–2009)2003Alle Getriebe außer: M58
- Volvo S60 (2001–2009)2004–2009Nur Getriebe: AW50/51 AWD, AW55-50/51SN
- Volvo S70 (1997–2000)1999–2000Nur Getriebe: AW42 AWD, AW50-42
- Volvo S80 (1999–2006)1999–2004
- Volvo S80 (1999–2006)2005–2006Alle Getriebe außer: M56
- Volvo V70 (1997–2000)1999Alle Motoren außer: B5202FS, B5252FS, D5252T MSA 15.7, GB5252S, GB5252S2 · Nur Getriebe: AW42 AWD, AW50-42
- Volvo V70 (1997–2000)2000Nur Getriebe: AW42 AWD, AW50-42
- Volvo V70 (2000–2008)2000–2002
- Volvo V70 (2000–2008)2003Alle Getriebe außer: M58
- Volvo V70 (2000–2008)2004–2007Nur Getriebe: AW50/51 AWD, AW55-50/51SN
- Volvo V70 (2000–2008)2008Nur Getriebe: AW55-50/51SN
- Volvo V70 XC (1998–2000)1999Nur Motor: B5254T · Nur Getriebe: AW42 AWD
- Volvo V70 XC (1998–2000)2000Nur Getriebe: AW42 AWD
- Volvo V70 XC / XC70 (2001–2007)2001–2002
- Volvo V70 XC / XC70 (2001–2007)2003–2007Nur Getriebe: AW50/51 AWD
- Volvo XC90 (2003–)2003, 2015
- Volvo XC90 (2003–)2004Alle Getriebe außer: M66 AWD
- Volvo XC90 (2003–)2005–2006Alle Getriebe außer: M66 AWD, TF-80SC AWD
- Volvo XC90 (2003–)2007Nur Getriebe: AW50/51 AWD, AW55-50/51SN
- Volvo XC90 (2003–)2008–2014Nur Getriebe: AW50/51 AWD
Was bedeutet der Fehlercode?
The control module registers a faulty signal from the speed sensor on the transmission when the vehicle speed is above a certain level. The fault is intermittent, so it may have occurred on an earlier occasion without being active now.
Mögliche Ursachen
- Contact resistance in the connections
- Open circuit or short to ground or supply voltage in the power supply
- Open circuit or short to ground or supply voltage in the signal wire
- Defective speed sensor
- Incorrect transmission fitted after a replacement
Was Sie tun können
- 1The fault is intermittent: check the connectors on the transmission and the control module for contact resistance and oxidation, and see whether the harness is chafed where it bends
- 2If you have a diagnostic tool: follow the transmission input and output speeds in live data as the car accelerates and check that the values track each other
- 3Clear the fault code and road test the car to see whether it returns
- 4If the transmission has been replaced, have a workshop check that the correct one is fitted, and that the sensor wires are intact
- 5If the fault remains, have a workshop check the wiring to the sensor and replace the sensor if needed
Symptome, die Sie bemerken können4
- The general orange warning lamp is lit
- The malfunction indicator lamp (MIL) is lit
- No lock-up function
- Gear shifts are harsh
Was der Fehler beeinflussen kann3
- No torque reduction during shifting
- No lock-up function
- The Emergency mode I program in the transmission control module is activated
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.