VOLVO
TCM-0032 - Lock-up function. Faulty engage/disengage
System
Getriebesteuergerät (TCM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
4 ModelleS60 (2001–2009), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (9)
- Volvo S60 (2001–2009)2006–2007Nur Motor: B5254T4, D5244T4, D5244T5 · Nur Getriebe: TF-80SC, TF-80SC AWD
- Volvo S60 (2001–2009)2008–2009Nur Motor: D5244T4, D5244T5 · Nur Getriebe: TF-80SC
- Volvo V70 (2000–2008)2006–2007Nur Motor: B5254T4, D5244T4, D5244T5 · Nur Getriebe: TF-80SC, TF-80SC AWD
- Volvo V70 (2000–2008)2008Nur Motor: D5244T5 · Nur Getriebe: TF-80SC
- Volvo V70 XC / XC70 (2001–2007)2006–2007Nur Motor: D5244T4 · Nur Getriebe: TF-80SC AWD
- Volvo XC90 (2003–)2006–2007Nur Motor: D5244T4 · Nur Getriebe: TF-80SC AWD
- Volvo XC90 (2003–)2008–2010Nur Motor: D5244T4, D5244T5 · Nur Getriebe: TF-80SC AWD
- Volvo XC90 (2003–)2011Nur Motor: D5244T18, D5244T4, D5244T5 · Nur Getriebe: TF-80SC, TF-80SC AWD
- Volvo XC90 (2003–)2012Alle Motoren außer: B5254T2, B6324S5 · Alle Getriebe außer: AW50/51 AWD
Was bedeutet der Fehlercode?
This is an event-controlled code, meant as information, and it does not indicate a fault in the control module. It is set when the engine has stopped suddenly, for example if lock-up was wrongly engaged when the car stopped, or if the car rolled backwards with the selector in a position.
Mögliche Ursachen
- The car has rolled backwards while the selector was in a position
- The engine cut out because the fuel ran short
- Mechanical fault in the engine
- Lock-up incorrectly engaged when the vehicle is stopped
Was Sie tun können
- 1This is an information code and does not point to a fault in the control module; if it does not return, no action is needed
- 2Clear the fault code and check whether it comes back
- 3If the engine stops without the fuel having run out, have a workshop check the engine for a mechanical fault
Symptome, die Sie bemerken können5
- The general warning lamp is lit
- The malfunction indicator lamp (MIL) is lit
- Gear shifts are harsh
- No gear shifts
- The gears slip abnormally
Was der Fehler beeinflussen kann2
- Adaptation is blocked
- Neutral check is blocked
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.