VOLVO
TCM-006A - Gear 3. Incorrect apply
System
Getriebesteuergerät (TCM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
4 ModelleS60 (2001–2009), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (9)
- Volvo S60 (2001–2009)2006–2007Nur Motor: B5254T4, D5244T4, D5244T5 · Nur Getriebe: TF-80SC, TF-80SC AWD
- Volvo S60 (2001–2009)2008–2009Nur Motor: D5244T4, D5244T5 · Nur Getriebe: TF-80SC
- Volvo V70 (2000–2008)2006–2007Nur Motor: B5254T4, D5244T4, D5244T5 · Nur Getriebe: TF-80SC, TF-80SC AWD
- Volvo V70 (2000–2008)2008Nur Motor: D5244T5 · Nur Getriebe: TF-80SC
- Volvo V70 XC / XC70 (2001–2007)2006–2007Nur Motor: D5244T4 · Nur Getriebe: TF-80SC AWD
- Volvo XC90 (2003–)2006–2007Nur Motor: D5244T4 · Nur Getriebe: TF-80SC AWD
- Volvo XC90 (2003–)2008–2010Nur Motor: D5244T4, D5244T5 · Nur Getriebe: TF-80SC AWD
- Volvo XC90 (2003–)2011Nur Motor: D5244T18, D5244T4, D5244T5 · Nur Getriebe: TF-80SC, TF-80SC AWD
- Volvo XC90 (2003–)2012Alle Motoren außer: B5254T2, B6324S5 · Alle Getriebe außer: AW50/51 AWD
Was bedeutet der Fehlercode?
The transmission control module calculates the gear ratio from the speeds going into and out of the transmission. It has found that the ratio is close to a gear other than gear 3, which the control module has selected, so gear 3 has not engaged properly.
Mögliche Ursachen
- Contact resistance in the connections
- One of the solenoids has stuck in the OFF or ON position
- Mechanical fault in the transmission
Was Sie tun können
- 1Read off the fault code, clear it and road test the car to see whether it comes back
- 2Look at the transmission oil: if the level is low, check for leaks before topping up; oil that smells burnt needs changing by a workshop
- 3Have a diagnostic tool? Read the current gear in live data during a road test and see whether gear 3 is really engaged when the car is running in it
- 4Have a workshop check the solenoids that engage gear 3 and their connectors; if nothing is found, the control system may need replacing
Symptome, die Sie bemerken können4
- Malfunction indicator lamp (MIL) on
- General warning lamp on
- Abnormally slipping gear changes
- No gear changes
Was der Fehler beeinflussen kann1
- The transmission switches over to an auxiliary program
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.