VOLVO
TCM-012D - Gear shift function. Wrong gearratio
System
Getriebesteuergerät (TCM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
4 ModelleS60 (2001–2009), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (9)
- Volvo S60 (2001–2009)2006–2007Nur Motor: B5254T4, D5244T4, D5244T5 · Nur Getriebe: TF-80SC, TF-80SC AWD
- Volvo S60 (2001–2009)2008–2009Nur Motor: D5244T4, D5244T5 · Nur Getriebe: TF-80SC
- Volvo V70 (2000–2008)2006–2007Nur Motor: B5254T4, D5244T4, D5244T5 · Nur Getriebe: TF-80SC, TF-80SC AWD
- Volvo V70 (2000–2008)2008Nur Motor: D5244T5 · Nur Getriebe: TF-80SC
- Volvo V70 XC / XC70 (2001–2007)2006–2007Nur Motor: D5244T4 · Nur Getriebe: TF-80SC AWD
- Volvo XC90 (2003–)2006–2007Nur Motor: D5244T4 · Nur Getriebe: TF-80SC AWD
- Volvo XC90 (2003–)2008–2010Nur Motor: D5244T4, D5244T5 · Nur Getriebe: TF-80SC AWD
- Volvo XC90 (2003–)2011Nur Motor: D5244T18, D5244T4, D5244T5 · Nur Getriebe: TF-80SC, TF-80SC AWD
- Volvo XC90 (2003–)2012Alle Motoren außer: B5254T2, B6324S5 · Alle Getriebe außer: AW50/51 AWD
Was bedeutet der Fehlercode?
The transmission control module (TCM) compares the input and output speed from the gearbox's two speed sensors and works out the gear ratio. The fault code is set when the control module registers that the gearbox is mechanically in neutral although the gear selector is in D or R. The cause can be an internal fault in the control system or worn components that cause slipping.
Mögliche Ursachen
- Internal malfunction in the gearbox control system
- Mechanical fault in the gearbox, where worn components cause slipping or too low system pressure
Was Sie tun können
- 1Read and clear the fault code, road test the car and see whether it returns
- 2With a diagnostic tool, read input and output speed in live data and check that they follow each other smoothly when accelerating through the gears
- 3If slipping or failure to shift occurs, worn components in the gearbox may be the cause
- 4Have a workshop check the transmission fluid level and quality, since too low a system pressure can cause slipping
- 5Have a workshop decide whether the gearbox needs replacing; after a repair the adaptation and fluid quality counter are reset
Symptome, die Sie bemerken können5
- The general warning lamp is lit
- The malfunction indicator lamp is lit
- Gears slip abnormally
- Harsh gear changes
- Gear changes do not occur
Was der Fehler beeinflussen kann1
- An auxiliary program in the control module is activated
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.