VOLVO
TCM-0133 - Linear pressure solenoid SLC1. Signal too high
System
Getriebesteuergerät (TCM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
4 ModelleS60 (2001–2009), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (9)
- Volvo S60 (2001–2009)2006–2007Nur Motor: B5254T4, D5244T4, D5244T5 · Nur Getriebe: TF-80SC, TF-80SC AWD
- Volvo S60 (2001–2009)2008–2009Nur Motor: D5244T4, D5244T5 · Nur Getriebe: TF-80SC
- Volvo V70 (2000–2008)2006–2007Nur Motor: B5254T4, D5244T4, D5244T5 · Nur Getriebe: TF-80SC, TF-80SC AWD
- Volvo V70 (2000–2008)2008Nur Motor: D5244T5 · Nur Getriebe: TF-80SC
- Volvo V70 XC / XC70 (2001–2007)2006–2007Nur Motor: D5244T4 · Nur Getriebe: TF-80SC AWD
- Volvo XC90 (2003–)2006–2007Nur Motor: D5244T4 · Nur Getriebe: TF-80SC AWD
- Volvo XC90 (2003–)2008–2010Nur Motor: D5244T4, D5244T5 · Nur Getriebe: TF-80SC AWD
- Volvo XC90 (2003–)2011Nur Motor: D5244T18, D5244T4, D5244T5 · Nur Getriebe: TF-80SC, TF-80SC AWD
- Volvo XC90 (2003–)2012Alle Motoren außer: B5254T2, B6324S5 · Alle Getriebe außer: AW50/51 AWD
Was bedeutet der Fehlercode?
Linear pressure solenoid SLC1 gives too high a signal: the control module has measured a current in the circuit above the permitted level. The solenoid cannot then be controlled correctly, which can cause slipping, harsh or failed gear changes.
Mögliche Ursachen
- Control signal wire short-circuited to the battery positive
- The linear pressure solenoid does not function
- Internal fault inside the TCM
Was Sie tun können
- 1Clear the fault code and road test the car; if it returns, the fault has not been fixed
- 2Use a multimeter to check that the control signal wire to the solenoid has no contact with the battery positive
- 3If you have a diagnostic tool: read the SLC1 solenoid value in live data while gears are shifted, and see whether it changes
- 4If no fault is found in the wire, have a workshop check the solenoid
- 5If the fault returns, have a workshop check the control module
Symptome, die Sie bemerken können5
- The general warning lamp is lit
- The malfunction indicator lamp is lit
- Gears slip abnormally
- Harsh gear changes
- Gear changes do not occur
Was der Fehler beeinflussen kann1
- An auxiliary program in the control module is activated
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.