VOLVO
TCM-0134 - Linear pressure solenoid SLC1. Faulty signal
System
Getriebesteuergerät (TCM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
4 ModelleS60 (2001–2009), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (9)
- Volvo S60 (2001–2009)2006–2007Nur Motor: B5254T4, D5244T4, D5244T5 · Nur Getriebe: TF-80SC, TF-80SC AWD
- Volvo S60 (2001–2009)2008–2009Nur Motor: D5244T4, D5244T5 · Nur Getriebe: TF-80SC
- Volvo V70 (2000–2008)2006–2007Nur Motor: B5254T4, D5244T4, D5244T5 · Nur Getriebe: TF-80SC, TF-80SC AWD
- Volvo V70 (2000–2008)2008Nur Motor: D5244T5 · Nur Getriebe: TF-80SC
- Volvo V70 XC / XC70 (2001–2007)2006–2007Nur Motor: D5244T4 · Nur Getriebe: TF-80SC AWD
- Volvo XC90 (2003–)2006–2007Nur Motor: D5244T4 · Nur Getriebe: TF-80SC AWD
- Volvo XC90 (2003–)2008–2010Nur Motor: D5244T4, D5244T5 · Nur Getriebe: TF-80SC AWD
- Volvo XC90 (2003–)2011Nur Motor: D5244T18, D5244T4, D5244T5 · Nur Getriebe: TF-80SC, TF-80SC AWD
- Volvo XC90 (2003–)2012Alle Motoren außer: B5254T2, B6324S5 · Alle Getriebe außer: AW50/51 AWD
Was bedeutet der Fehlercode?
Linear pressure solenoid SLC1 gives a faulty signal. The control module has measured a current in the circuit that does not match what is expected, so SLC1 cannot regulate the system pressure. This can cause slipping, harsh or missing gear changes.
Mögliche Ursachen
- Contact resistance in the connectors
- Open circuit in the control signal or signal ground wire
- The linear pressure solenoid has stuck
- The linear pressure solenoid does not function
Was Sie tun können
- 1Read and clear the fault code, road test and see whether it returns
- 2If you have a diagnostic tool: read the SLC1 solenoid value in live data during a road test and see whether it changes as gears are engaged
- 3If the value does not change, the fault is permanent; a workshop should then check the solenoid, which may be stuck
- 4Use a multimeter to check that the wire to the solenoid is not broken
- 5Have a workshop check the connectors to the control module for contact resistance and oxidation
Symptome, die Sie bemerken können5
- The general warning lamp is lit
- The malfunction indicator lamp is lit
- Harsh gear changes
- Gear changes do not occur
- Gears slip abnormally
Was der Fehler beeinflussen kann1
- An auxiliary program in the control module is activated
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.