VOLVO
TCM-0144 - Linear pressure solenoid SLC3. Faulty signal
System
Getriebesteuergerät (TCM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
4 ModelleS60 (2001–2009), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (9)
- Volvo S60 (2001–2009)2006–2007Nur Motor: B5254T4, D5244T4, D5244T5 · Nur Getriebe: TF-80SC, TF-80SC AWD
- Volvo S60 (2001–2009)2008–2009Nur Motor: D5244T4, D5244T5 · Nur Getriebe: TF-80SC
- Volvo V70 (2000–2008)2006–2007Nur Motor: B5254T4, D5244T4, D5244T5 · Nur Getriebe: TF-80SC, TF-80SC AWD
- Volvo V70 (2000–2008)2008Nur Motor: D5244T5 · Nur Getriebe: TF-80SC
- Volvo V70 XC / XC70 (2001–2007)2006–2007Nur Motor: D5244T4 · Nur Getriebe: TF-80SC AWD
- Volvo XC90 (2003–)2006–2007Nur Motor: D5244T4 · Nur Getriebe: TF-80SC AWD
- Volvo XC90 (2003–)2008–2010Nur Motor: D5244T4, D5244T5 · Nur Getriebe: TF-80SC AWD
- Volvo XC90 (2003–)2011Nur Motor: D5244T18, D5244T4, D5244T5 · Nur Getriebe: TF-80SC, TF-80SC AWD
- Volvo XC90 (2003–)2012Alle Motoren außer: B5254T2, B6324S5 · Alle Getriebe außer: AW50/51 AWD
Was bedeutet der Fehlercode?
The control module has registered that the current in the circuit of the SLC3 solenoid is incorrect. SLC3 then cannot regulate the system pressure, which can cause harsh gear changes, missed gear changes or slipping.
Mögliche Ursachen
- Contact resistance in the connectors
- Open circuit in the control signal or signal ground wire
- Linear pressure solenoid SLC3 stuck
- Linear pressure solenoid SLC3 does not function
Was Sie tun können
- 1Read and clear the fault code, road test and see whether it returns
- 2If you have a diagnostic tool: read the SLC3 solenoid value in live data and see whether it changes when gears are engaged
- 3If the value does not change, the fault remains, and a workshop should check whether the solenoid has stuck
- 4Check that the wiring from the gearbox is not chafed or pinched
- 5If the wiring checks out, have a workshop replace the control system or the solenoid
Symptome, die Sie bemerken können5
- The general warning lamp is lit
- The malfunction indicator lamp is lit
- Harsh gear changes
- Gear changes do not occur
- Gears slip abnormally
Was der Fehler beeinflussen kann1
- An auxiliary program in the control module is activated
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.