VOLVO
TCM-0212 - Shift solenoid S3. Hydraulic fault
System
Getriebesteuergerät (TCM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
4 ModelleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Modelle nach Baujahr und Motor anzeigen (6)
- Volvo C30 (2007–2013)2007–2013Nur Getriebe: AW55-50/51SN
- Volvo C70 (2006–2013)2006–2013Nur Getriebe: AW55-50/51SN
- Volvo S40 (2004–2013)2004, 2011–2012Nur Getriebe: AW55-50/51SN
- Volvo S40 (2004–2013)2005–2010Nur Getriebe: AW50/51 AWD, AW55-50/51SN
- Volvo V50 (2004–2013)2004, 2011–2012Nur Getriebe: AW55-50/51SN
- Volvo V50 (2004–2013)2005–2010Nur Getriebe: AW50/51 AWD, AW55-50/51SN
Was bedeutet der Fehlercode?
Shift solenoid S3 has stuck in the ON position. The control module has noticed that the speed and engine speed signals do not match the expected values and that the wrong gear is engaged. This can affect gear changes, and the car then switches to an emergency program.
Mögliche Ursachen
- Shift solenoid S3 has mechanically stuck in the ON position
- The solenoid does not function
Was Sie tun können
- 1Have a workshop check the transmission fluid level and quality, as the level varies with the oil temperature
- 2If the oil smells burnt or there are metal particles on the dipstick, have a workshop decide whether the gearbox needs replacing
- 3If you have a diagnostic tool: activate S3 and listen for a click; if no click is heard, the solenoid has a mechanical fault
- 4Have a workshop inspect the control system for metal particles and dirt, and replace solenoid S3 if the system is clean
- 5After the repair, a workshop should reset the adaptation and the fluid quality counter
Symptome, die Sie bemerken können2
- The malfunction indicator lamp is lit
- The general warning lamp is lit
Was der Fehler beeinflussen kann1
- The control module emergency program Emergency mode 2 is activated
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.