VOLVO
TCM-0286 - Hall sensor in gear selector. Internal fault
System
Getriebesteuergerät (TCM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
4 ModelleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Modelle nach Baujahr und Motor anzeigen (6)
- Volvo C30 (2007–2013)2007–2013Nur Getriebe: AW55-50/51SN
- Volvo C70 (2006–2013)2006–2013Nur Getriebe: AW55-50/51SN
- Volvo S40 (2004–2013)2004, 2011–2012Nur Getriebe: AW55-50/51SN
- Volvo S40 (2004–2013)2005–2010Nur Getriebe: AW50/51 AWD, AW55-50/51SN
- Volvo V50 (2004–2013)2004, 2011–2012Nur Getriebe: AW55-50/51SN
- Volvo V50 (2004–2013)2005–2010Nur Getriebe: AW50/51 AWD, AW55-50/51SN
Was bedeutet der Fehlercode?
The gear position sensor in the transmission control module has registered that the main sensor signal is too high. The sensor receives the selector position through a cable, so the fault may be due to the sensor position (offset) needing adjustment or an internal fault in the control module. Gear changes may then become harsh and the car switches to an emergency program.
Mögliche Ursachen
- The gear position sensor position (offset) needs adjusting
- Internal fault inside the TCM
Was Sie tun können
- 1With a diagnostic tool, move the selector through all positions; an undefined reading in P, R, N or D means the cable needs checking
- 2Have a workshop check that the selector cable is correctly adjusted and calibrate the position sensor
- 3Clear the fault code and road test to see whether it returns
- 4If the code returns after calibration, have a workshop replace the transmission control module
Symptome, die Sie bemerken können3
- The general warning lamp is lit
- The malfunction indicator lamp is lit
- Harsh gear changes
Was der Fehler beeinflussen kann1
- The control module emergency program Emergency mode 4 is activated
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.