VOLVO
TCM-0287 - Hall sensor in the gear selector. Internal fault
System
Getriebesteuergerät (TCM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
4 ModelleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Modelle nach Baujahr und Motor anzeigen (6)
- Volvo C30 (2007–2013)2007–2013Nur Getriebe: AW55-50/51SN
- Volvo C70 (2006–2013)2006–2013Nur Getriebe: AW55-50/51SN
- Volvo S40 (2004–2013)2004, 2011–2012Nur Getriebe: AW55-50/51SN
- Volvo S40 (2004–2013)2005–2010Nur Getriebe: AW50/51 AWD, AW55-50/51SN
- Volvo V50 (2004–2013)2004, 2011–2012Nur Getriebe: AW55-50/51SN
- Volvo V50 (2004–2013)2005–2010Nur Getriebe: AW50/51 AWD, AW55-50/51SN
Was bedeutet der Fehlercode?
The main sensor in the gear position sensor has registered a value that is too low. The sensor in the transmission control module receives the selector position through a cable, and the fault is due either to the position needing adjustment or an internal fault in the control module. The car may then enter an emergency program with harsher gear changes.
Mögliche Ursachen
- The gear position sensor position (offset) needs adjusting
- Internal fault inside the TCM
Was Sie tun können
- 1Read the fault code and then clear it
- 2If you have a diagnostic tool: show the selector position in live data and compare it with the display as the lever is moved
- 3Have a workshop check the selector cable adjustment and calibrate the gear position sensor using the correct procedure
- 4If the code remains after calibration, have a workshop replace the transmission control module
Symptome, die Sie bemerken können3
- The general warning lamp is lit
- The malfunction indicator lamp is lit
- Harsh gear changes
Was der Fehler beeinflussen kann1
- The control module emergency program Emergency mode 4 is activated
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.