VOLVO
TCM-0412 - Shift fork 3. Plausible position
System
Getriebesteuergerät (TCM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
4 ModelleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Modelle nach Baujahr und Motor anzeigen (10)
- Volvo C30 (2007–2013)2008Nur Motor: D4204T · Nur Getriebe: MPS6
- Volvo C30 (2007–2013)2009–2010Nur Motor: B4204S3, D4204T · Nur Getriebe: MPS6
- Volvo C30 (2007–2013)2011–2013Nur Motor: B4204S3 · Nur Getriebe: MPS6
- Volvo C70 (2006–2013)2009–2010Nur Motor: D4204T · Nur Getriebe: MPS6
- Volvo S40 (2004–2013)2008Nur Motor: D4204T · Nur Getriebe: MPS6
- Volvo S40 (2004–2013)2009–2010Nur Motor: B4204S3, D4204T · Nur Getriebe: MPS6
- Volvo S40 (2004–2013)2011–2012Nur Motor: B4204S3 · Nur Getriebe: MPS6
- Volvo V50 (2004–2013)2008Nur Motor: D4204T · Nur Getriebe: MPS6
- Volvo V50 (2004–2013)2009–2010Nur Motor: B4204S3, D4204T · Nur Getriebe: MPS6
- Volvo V50 (2004–2013)2011–2012Nur Motor: B4204S3 · Nur Getriebe: MPS6
Was bedeutet der Fehlercode?
The transmission control module (TCM) has found that the position of shift fork 3 is unreasonable. Shift fork 3 is one of four forks that engage the gears, and each fork has its own position sensor that reports its position to the control module. The fault may lie in the sensor, the voltage supply or the control module.
Mögliche Ursachen
- Damaged position sensor
- The sensor has an incorrect position
- Incorrect voltage supply to the sensor
- Damaged transmission control module (TCM)
Was Sie tun können
- 1Read out the fault codes from the transmission control module and deal first with any codes that may share the same cause, since a fault in the gearbox often sets several codes
- 2If you have diagnostic equipment, compare the position value for shift fork 3 with the others in live data and see whether anything stands out clearly
- 3If readings are within limits, the fault has probably been sporadic; clear the code and road test to see whether it returns
- 4If a value is outside or at the limit, a workshop should replace the mechatronic unit; a fault inside the control module needs a new, programmed module
Symptome, die Sie bemerken können5
- Check engine light comes on or behaves abnormally
- Text window with yellow warning symbol and message
- Gears shift hard or jerky, sometimes or all the time
- Gear changes take too long to complete, sometimes or all the time
- Gears shift too early, too late or too often, sometimes or all the time
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.