VOLVO
TCM-0413 - Shift fork 3. Faulty signal
System
Getriebesteuergerät (TCM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
4 ModelleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Modelle nach Baujahr und Motor anzeigen (10)
- Volvo C30 (2007–2013)2008Nur Motor: D4204T · Nur Getriebe: MPS6
- Volvo C30 (2007–2013)2009–2010Nur Motor: B4204S3, D4204T · Nur Getriebe: MPS6
- Volvo C30 (2007–2013)2011–2013Nur Motor: B4204S3 · Nur Getriebe: MPS6
- Volvo C70 (2006–2013)2009–2010Nur Motor: D4204T · Nur Getriebe: MPS6
- Volvo S40 (2004–2013)2008Nur Motor: D4204T · Nur Getriebe: MPS6
- Volvo S40 (2004–2013)2009–2010Nur Motor: B4204S3, D4204T · Nur Getriebe: MPS6
- Volvo S40 (2004–2013)2011–2012Nur Motor: B4204S3 · Nur Getriebe: MPS6
- Volvo V50 (2004–2013)2008Nur Motor: D4204T · Nur Getriebe: MPS6
- Volvo V50 (2004–2013)2009–2010Nur Motor: B4204S3, D4204T · Nur Getriebe: MPS6
- Volvo V50 (2004–2013)2011–2012Nur Motor: B4204S3 · Nur Getriebe: MPS6
Was bedeutet der Fehlercode?
The signal from the position sensor for shift fork 3 changes too quickly, which the transmission control module (TCM) reacts to. The fault concerns that sensor, but the other fault codes present show whether the cause lies in the sensor or in the transmission.
Mögliche Ursachen
- Damaged position sensor
- Incorrect voltage supply to the sensor
- Damaged transmission control module (TCM)
Was Sie tun können
- 1Read out the fault codes from the transmission control module again to see whether the fault is in the transmission or in the mechatronic unit
- 2With diagnostic equipment, look at the position value for shift fork 3 in live data and see whether it changes unevenly when the gears are engaged
- 3If fault code TCM-042C is set, the cause is outside the mechatronic unit and a workshop should replace the transmission
- 4If any sensor code TCM-0410, TCM-0411 or TCM-0415 is set but not TCM-042C, a workshop should replace the mechatronic unit
- 5If none of these codes is set, a workshop should check the input shaft speeds and the counter values to decide between a sensor and a mechanical fault
Symptome, die Sie bemerken können5
- Check engine light comes on or behaves abnormally
- Text window with yellow warning symbol and message
- Gears shift hard or jerky, sometimes or all the time
- Gears shift too early, too late or too often, sometimes or all the time
- No automatic gear changes
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.