Was bedeutet der Fehlercode TCM-043D?

Diagnose und Fehlercodedefinition für TCM-043D (Volvo C30 (2007–2013), Volvo C30 (2007–2013), Volvo C30 (2007–2013)). Steuergerätereparatur bei OBD Tuning.

VOLVO

TCM-043D - Shift fork. Shift fork 3 requested but movment on shift fork 4

System

Getriebesteuergerät (TCM)

Volvo-Modelle, für die dieser Fehlercode gilt

Gilt für folgende Modelle:

4 Modelle

C30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)

Modelle nach Baujahr und Motor anzeigen (10)

Was bedeutet der Fehlercode?

The transmission control module (TCM) has requested a movement of shift fork 3, but shift fork 4 moves instead. The control valve decides whether the odd or the even gears are to be used, and the fault means the mechatronic unit must be replaced.

Mögliche Ursachen

Damaged first shift solenoid
Damaged second shift solenoid

Was Sie tun können

1Read out the fault codes from the transmission control module and deal first with any codes that may share the same cause
2The fault means the mechatronic unit must be replaced, and a workshop should do this
3If the control module is also replaced, it must be programmed by a workshop, because a replacement control module arrives without software
4Then read out the fault codes again to see whether the fault code remains

Symptome, die Sie bemerken können5

Check engine light comes on or behaves abnormally
Message and yellow warning symbol in the display
Gear changes take too long to complete, sometimes or all the time
Gears shift hard or jerky, sometimes or all the time
No automatic gear changes

Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.