Was bedeutet der Fehlercode TCM-0443?

Diagnose und Fehlercodedefinition für TCM-0443 (Volvo C30 (2007–2013), Volvo C30 (2007–2013), Volvo C30 (2007–2013)). Steuergerätereparatur bei OBD Tuning.

VOLVO

TCM-0443 - Shift fork 3 or 4. Shift movement in opposit direktion than requested

System

Getriebesteuergerät (TCM)

Volvo-Modelle, für die dieser Fehlercode gilt

Gilt für folgende Modelle:

4 Modelle

C30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)

Modelle nach Baujahr und Motor anzeigen (10)

Was bedeutet der Fehlercode?

Shift fork 3 or 4 travels the wrong way compared with the one the TCM has requested. The fault lies in the second hydraulic valve or in the control solenoid for the valves, and it means the mechatronic unit must be replaced.

Mögliche Ursachen

Damaged second hydraulic valve
Damaged control solenoid for the hydraulic valves

Was Sie tun können

1Read out the fault codes from the transmission control module and deal first with any codes that may share the same cause
2The fault means the mechatronic unit must be replaced, and a workshop should do this
3If the control module is also replaced, it must be programmed by a workshop, because a replacement control module arrives without software
4Then read out the fault codes again to see whether the fault code remains

Symptome, die Sie bemerken können5

Check engine light comes on or behaves abnormally
Text window with yellow warning symbol and message
Shifts occur too early, too late or too often, sometimes or all the time
Gear changes take too long to complete, sometimes or all the time
Gears shift hard or jerky, sometimes or all the time

Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.