Was bedeutet der Fehlercode TCM-047E?

Diagnose und Fehlercodedefinition für TCM-047E (Volvo C30 (2007–2013), Volvo C30 (2007–2013), Volvo C30 (2007–2013)). Steuergerätereparatur bei OBD Tuning.

VOLVO

TCM-047E - Transmission input speed. Plausible signal

System

Getriebesteuergerät (TCM)

Volvo-Modelle, für die dieser Fehlercode gilt

Gilt für folgende Modelle:

4 Modelle

C30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)

Modelle nach Baujahr und Motor anzeigen (10)

Was bedeutet der Fehlercode?

The incoming speed sensor, which sits at the clutch, gives a signal that deviates from the engine speed. The TCM takes its engine speed reading from the engine control module over the CAN bus and compares it with the sensor signal. The sensor signal is also used to check the other two speed sensors.

Mögliche Ursachen

The incoming speed sensor is not working

Was Sie tun können

1Read out the fault codes from the transmission control module. If several speed sensors show faults, the cause may instead lie in the control module
2If you have diagnostic equipment, compare the incoming speed value in live data with the engine speed while the engine is running and see whether they match
3The incoming speed sensor must be replaced, which a workshop should do
4If the fault is inside the control module, it must be replaced; a new module is delivered without software and must be programmed by a workshop

Symptome, die Sie bemerken können2

No automatic gear changes
No forward or reverse movement with a gear selected

Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.