Was bedeutet der Fehlercode TCM-0480?

Diagnose und Fehlercodedefinition für TCM-0480 (Volvo C30 (2007–2013), Volvo C30 (2007–2013), Volvo C30 (2007–2013)). Steuergerätereparatur bei OBD Tuning.

VOLVO

TCM-0480 - Pressure sensor clutch even gears. Signal too high

System

Getriebesteuergerät (TCM)

Volvo-Modelle, für die dieser Fehlercode gilt

Gilt für folgende Modelle:

4 Modelle

C30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)

Modelle nach Baujahr und Motor anzeigen (10)

Was bedeutet der Fehlercode?

The pressure sensor for the clutch for odd gears gives too high a signal to the transmission control module (TCM). The sensor measures the pressure on the clutch, so a wrong value gives the control module incorrect information for controlling the clutch. The fault may come from a sensor wire short-circuited to supply voltage or from a damaged sensor.

Mögliche Ursachen

Pressure sensor short-circuited to supply voltage
Pressure sensor for the clutch for odd gears is damaged

Was Sie tun können

1Read out the fault codes from the transmission control module and deal first with any codes that may share the same cause
2Use a multimeter to check that the wire to the pressure sensor has no contact with the battery's positive supply
3The fault points to a damaged pressure sensor or a fault at its connection; the mechatronic unit must then be replaced, which a workshop should do
4If the fault is inside the control module, it must be replaced, and a new module is delivered without software and must be programmed by a workshop

Symptome, die Sie bemerken können5

Text window with yellow warning symbol and message
Gears shift hard or jerky, sometimes or all the time
No forward or reverse movement with a gear selected
Gear changes take too long to complete, sometimes or all the time
Shifts occur too early, too late or too often, sometimes or all the time

Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.