VOLVO
TCM-04A0 - Communication between control units. Invalid data recieved from brake control module (BCM)
System
Getriebesteuergerät (TCM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
4 ModelleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Modelle nach Baujahr und Motor anzeigen (10)
- Volvo C30 (2007–2013)2008Nur Motor: D4204T · Nur Getriebe: MPS6
- Volvo C30 (2007–2013)2009–2010Nur Motor: B4204S3, D4204T · Nur Getriebe: MPS6
- Volvo C30 (2007–2013)2011–2013Nur Motor: B4204S3 · Nur Getriebe: MPS6
- Volvo C70 (2006–2013)2009–2010Nur Motor: D4204T · Nur Getriebe: MPS6
- Volvo S40 (2004–2013)2008Nur Motor: D4204T · Nur Getriebe: MPS6
- Volvo S40 (2004–2013)2009–2010Nur Motor: B4204S3, D4204T · Nur Getriebe: MPS6
- Volvo S40 (2004–2013)2011–2012Nur Motor: B4204S3 · Nur Getriebe: MPS6
- Volvo V50 (2004–2013)2008Nur Motor: D4204T · Nur Getriebe: MPS6
- Volvo V50 (2004–2013)2009–2010Nur Motor: B4204S3, D4204T · Nur Getriebe: MPS6
- Volvo V50 (2004–2013)2011–2012Nur Motor: B4204S3 · Nur Getriebe: MPS6
Was bedeutet der Fehlercode?
The transmission control module (TCM) has received invalid data from the brake control module (BCM) over the CAN bus. Data from the brake control module, such as wheel speed and whether the brake pedal is pressed, is used in the transmission's control.
Mögliche Ursachen
- Fault in the CAN communication between the transmission control module (TCM) and the brake control module (BCM)
- Damaged brake control module (BCM)
- Damaged transmission control module (TCM)
Was Sie tun können
- 1Start by reading the codes stored in the CEM and the BCM, and remedy them
- 2Do not clear this fault code until the codes in the CEM and the BCM have been remedied and cleared
- 3Do not work on the brake control module or the electronics of the brake system yourself; have a workshop check it
- 4If the CEM and BCM show no codes and the fault remains after clearing, the transmission control module is the likely cause and needs replacing and programming
Symptome, die Sie bemerken können2
- Text window with yellow warning symbol and message
- Poor performance or lack of power, especially when pulling away from standstill
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.