VOLVO
TCM-0540 - Driver 3. Faulty driver
System
Getriebesteuergerät (TCM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
4 ModelleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Modelle nach Baujahr und Motor anzeigen (10)
- Volvo C30 (2007–2013)2008Nur Motor: D4204T · Nur Getriebe: MPS6
- Volvo C30 (2007–2013)2009–2010Nur Motor: B4204S3, D4204T · Nur Getriebe: MPS6
- Volvo C30 (2007–2013)2011–2013Nur Motor: B4204S3 · Nur Getriebe: MPS6
- Volvo C70 (2006–2013)2009–2010Nur Motor: D4204T · Nur Getriebe: MPS6
- Volvo S40 (2004–2013)2008Nur Motor: D4204T · Nur Getriebe: MPS6
- Volvo S40 (2004–2013)2009–2010Nur Motor: B4204S3, D4204T · Nur Getriebe: MPS6
- Volvo S40 (2004–2013)2011–2012Nur Motor: B4204S3 · Nur Getriebe: MPS6
- Volvo V50 (2004–2013)2008Nur Motor: D4204T · Nur Getriebe: MPS6
- Volvo V50 (2004–2013)2009–2010Nur Motor: B4204S3, D4204T · Nur Getriebe: MPS6
- Volvo V50 (2004–2013)2011–2012Nur Motor: B4204S3 · Nur Getriebe: MPS6
Was bedeutet der Fehlercode?
One of the transmission's three power stages, power stage 3, is not working correctly. The power stage controls the solenoids CSMS2, CSPS2 and SHSS1 in the transmission. The fault is detected when the output current is too high, when a circuit is open, or when the output voltage is too low. The fault is caused by a damaged power stage or a damaged control module.
Mögliche Ursachen
- Damaged power stage
- Damaged transmission control module (TCM)
Was Sie tun können
- 1Read the fault codes in the central electronic module (CEM). If any of them cause too little voltage reaching the transmission control module, fix that first
- 2Check the connectors and wiring between the transmission control module and the CEM for oxidation, loose connections and open circuits
- 3Clear TCM-0540 and drive the car to see whether it returns
- 4Have a workshop check the power stage with diagnostic equipment. If the control module is faulty, a workshop must replace it
Symptome, die Sie bemerken können5
- Malfunction Indicator Light (check engine) lit or behaving abnormally
- Yellow warning symbol and text message in the display
- No automatic gear changes
- No forward or reverse movement with a gear selected
- The car may feel weak or lack power when pulling away from a standstill
Was der Fehler beeinflussen kann1
- The two other power stages can take over the function, but the transmission's function may be severely limited depending on which power stage is damaged
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.