TCM-0571
VOLVO
TCM-0571 - Multiplex solenoid driver, clutch cooling and hydraulic pressure gear change. Voltage too high
System
Getriebesteuergerät (TCM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
4 ModelleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Modelle nach Baujahr und Motor anzeigen (10)
- Volvo C30 (2007–2013)2008Nur Motor: D4204T · Nur Getriebe: MPS6
- Volvo C30 (2007–2013)2009–2010Nur Motor: B4204S3, D4204T · Nur Getriebe: MPS6
- Volvo C30 (2007–2013)2011–2013Nur Motor: B4204S3 · Nur Getriebe: MPS6
- Volvo C70 (2006–2013)2009–2010Nur Motor: D4204T · Nur Getriebe: MPS6
- Volvo S40 (2004–2013)2008Nur Motor: D4204T · Nur Getriebe: MPS6
- Volvo S40 (2004–2013)2009–2010Nur Motor: B4204S3, D4204T · Nur Getriebe: MPS6
- Volvo S40 (2004–2013)2011–2012Nur Motor: B4204S3 · Nur Getriebe: MPS6
- Volvo V50 (2004–2013)2008Nur Motor: D4204T · Nur Getriebe: MPS6
- Volvo V50 (2004–2013)2009–2010Nur Motor: B4204S3, D4204T · Nur Getriebe: MPS6
- Volvo V50 (2004–2013)2011–2012Nur Motor: B4204S3 · Nur Getriebe: MPS6
Was bedeutet der Fehlercode?
The output stage for solenoid SHCMS, which controls clutch cooling and the hydraulic pressure used for gear changes, is shorted to supply voltage. The fault means the mechatronic unit in the transmission must be replaced. It may also be caused by a damaged solenoid, a damaged or dirty connector or circuit board, or a damaged transmission control module.
Mögliche Ursachen
- Damaged or dirty connector or circuit board
- Damaged solenoid
- Damaged transmission control module (TCM)
Was Sie tun können
- 1Read the fault codes, clear TCM-0571 and drive the car to see whether it comes back
- 2Have a workshop read the fault with diagnostic equipment. It normally points to the mechatronic unit needing replacement
- 3Have a workshop replace the mechatronic unit and confirm that the fault code does not return
Symptome, die Sie bemerken können5
- Malfunction Indicator Light (check engine) lit or behaving abnormally
- Yellow warning symbol and text message in the display
- Shifts hard or jerky
- Shifts too early, too late or too often
- No forward or reverse movement with a gear selected
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.