TCM-0580
VOLVO
TCM-0580 - Gear shift solenoid odd gears. Open circut
System
Getriebesteuergerät (TCM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
4 ModelleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Modelle nach Baujahr und Motor anzeigen (10)
- Volvo C30 (2007–2013)2008Nur Motor: D4204T · Nur Getriebe: MPS6
- Volvo C30 (2007–2013)2009–2010Nur Motor: B4204S3, D4204T · Nur Getriebe: MPS6
- Volvo C30 (2007–2013)2011–2013Nur Motor: B4204S3 · Nur Getriebe: MPS6
- Volvo C70 (2006–2013)2009–2010Nur Motor: D4204T · Nur Getriebe: MPS6
- Volvo S40 (2004–2013)2008Nur Motor: D4204T · Nur Getriebe: MPS6
- Volvo S40 (2004–2013)2009–2010Nur Motor: B4204S3, D4204T · Nur Getriebe: MPS6
- Volvo S40 (2004–2013)2011–2012Nur Motor: B4204S3 · Nur Getriebe: MPS6
- Volvo V50 (2004–2013)2008Nur Motor: D4204T · Nur Getriebe: MPS6
- Volvo V50 (2004–2013)2009–2010Nur Motor: B4204S3, D4204T · Nur Getriebe: MPS6
- Volvo V50 (2004–2013)2011–2012Nur Motor: B4204S3 · Nur Getriebe: MPS6
Was bedeutet der Fehlercode?
Solenoid SHSS1, which controls the shifts for the odd gears, has an open circuit. The solenoid sits in the transmission's mechatronic unit, where the solenoids also control the shift forks so that the correct gear is engaged. The fault is caused by a damaged or dirty connector or circuit board, a damaged solenoid, or a damaged transmission control module.
Mögliche Ursachen
- Connector or circuit board damaged or dirty
- Damaged solenoid
- Damaged transmission control module (TCM)
Was Sie tun können
- 1Read the fault codes, clear TCM-0580 and drive the car to see whether it returns
- 2Have a workshop open the transmission control system and inspect solenoid SHSS1 and its contacts for oxidation, dirt and metal deposits
- 3Have a workshop check the transmission oil level
- 4If the fault was found and fixed, the mechatronic unit can be refitted. Otherwise a workshop must replace it
Symptome, die Sie bemerken können5
- Malfunction Indicator Light (check engine) lit or behaving abnormally
- Yellow warning symbol and text message in the display
- Shifts hard or jerky
- No forward or reverse movement with a gear selected
- Shifts too early, too late or too often
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.