TCM-05A2
VOLVO
TCM-05A2 - Hydraulic pressure solenoid driver, odd gears. Current to high
System
Getriebesteuergerät (TCM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
4 ModelleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Modelle nach Baujahr und Motor anzeigen (10)
- Volvo C30 (2007–2013)2008Nur Motor: D4204T · Nur Getriebe: MPS6
- Volvo C30 (2007–2013)2009–2010Nur Motor: B4204S3, D4204T · Nur Getriebe: MPS6
- Volvo C30 (2007–2013)2011–2013Nur Motor: B4204S3 · Nur Getriebe: MPS6
- Volvo C70 (2006–2013)2009–2010Nur Motor: D4204T · Nur Getriebe: MPS6
- Volvo S40 (2004–2013)2008Nur Motor: D4204T · Nur Getriebe: MPS6
- Volvo S40 (2004–2013)2009–2010Nur Motor: B4204S3, D4204T · Nur Getriebe: MPS6
- Volvo S40 (2004–2013)2011–2012Nur Motor: B4204S3 · Nur Getriebe: MPS6
- Volvo V50 (2004–2013)2008Nur Motor: D4204T · Nur Getriebe: MPS6
- Volvo V50 (2004–2013)2009–2010Nur Motor: B4204S3, D4204T · Nur Getriebe: MPS6
- Volvo V50 (2004–2013)2011–2012Nur Motor: B4204S3 · Nur Getriebe: MPS6
Was bedeutet der Fehlercode?
The current in the circuit for the output stage of solenoid CSPS1, which controls the hydraulic pressure over the clutch for the odd gears, is too high. The fault is caused by damaged cables or a damaged circuit board, or by a damaged transmission control module.
Mögliche Ursachen
- Damaged cables or circuit board
- Damaged transmission control module (TCM)
Was Sie tun können
- 1Read the fault codes, clear TCM-05A2 and drive the car to see whether it comes back
- 2Have a workshop check the cables and circuit board in the transmission with diagnostic equipment
- 3If the fault remains after this check, a workshop must replace the transmission control module
Symptome, die Sie bemerken können5
- Malfunction Indicator Light (check engine) lit or behaving abnormally
- Yellow warning symbol and text message in the display
- No automatic gear changes
- No forward or reverse movement with a gear selected
- Shifts hard or jerky
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.