VOLVO
TCM-05A3 - Hydraulic pressure solenoid, clutch odd gears. Hydraulic pressure to low
System
Getriebesteuergerät (TCM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
4 ModelleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Modelle nach Baujahr und Motor anzeigen (10)
- Volvo C30 (2007–2013)2008Nur Motor: D4204T · Nur Getriebe: MPS6
- Volvo C30 (2007–2013)2009–2010Nur Motor: B4204S3, D4204T · Nur Getriebe: MPS6
- Volvo C30 (2007–2013)2011–2013Nur Motor: B4204S3 · Nur Getriebe: MPS6
- Volvo C70 (2006–2013)2009–2010Nur Motor: D4204T · Nur Getriebe: MPS6
- Volvo S40 (2004–2013)2008Nur Motor: D4204T · Nur Getriebe: MPS6
- Volvo S40 (2004–2013)2009–2010Nur Motor: B4204S3, D4204T · Nur Getriebe: MPS6
- Volvo S40 (2004–2013)2011–2012Nur Motor: B4204S3 · Nur Getriebe: MPS6
- Volvo V50 (2004–2013)2008Nur Motor: D4204T · Nur Getriebe: MPS6
- Volvo V50 (2004–2013)2009–2010Nur Motor: B4204S3, D4204T · Nur Getriebe: MPS6
- Volvo V50 (2004–2013)2011–2012Nur Motor: B4204S3 · Nur Getriebe: MPS6
Was bedeutet der Fehlercode?
Hydraulic pressure on clutch 1 (odd gears) reads lower than requested. The transmission builds hydraulic pressure for both clutches using a hydraulic pump and solenoids. The cause may be a low oil level or one of several damaged parts, such as a pressure sensor, a temperature sensor or a valve.
Mögliche Ursachen
- Low oil level
- Damaged pressure sensor
- Damaged output stage, solenoid CSPS1
- Solenoid CSMS1, for clutch pressure, is damaged
- Damaged valve CSM1, which routes the pressure between clutch and gear shifting
- Damaged temperature sensor
Was Sie tun können
- 1Read the fault codes, clear TCM-05A3 and drive the car to see whether the code returns
- 2Have a workshop check the transmission oil level, since a low level can cause this fault
- 3Have a workshop open the transmission control system and check the solenoid and the oil level
- 4If the fault cannot be found or fixed, a workshop must replace the mechatronic unit
Symptome, die Sie bemerken können5
- Malfunction Indicator Light (check engine) lit or behaving abnormally
- Yellow warning symbol and text message in the display
- Gear changes take too long to complete
- Shifts too early, too late or too often
- No automatic gear changes
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.