VOLVO
TCM-P055686 - Brake Booster Pressure Sensor Circuit Range/Performance. Bus Signal / Message Failures. Signal invalid
System
Getriebesteuergerät (TCM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
9 ModelleS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (9)
- Volvo S60 (2011–)2014–2015Nur Getriebe: TG-81SC
- Volvo S80 (2007–)2014–2015Nur Getriebe: TG-81SC
- Volvo V40 (2013–)2015Nur Getriebe: TG-81SC
- Volvo V40 Cross Country (2013–)2015Nur Getriebe: TG-81SC, TG-81SC AWD
- Volvo V60 (2011–)2014–2015Nur Getriebe: TG-81SC
- Volvo V60 Cross Country (2015–)2015Nur Getriebe: TG-81SC
- Volvo V70 (2008–)2014–2015Nur Getriebe: TG-81SC
- Volvo XC60 (2009–)2014–2015Nur Getriebe: TG-81SC
- Volvo XC70 (2008–)2014–2015Nur Getriebe: TG-81SC
Was bedeutet der Fehlercode?
Although the code is named after the brake booster pressure sensor, it concerns the speed signal from the brake control module (BCM), which the transmission control module receives over the CAN network. The code is set when the signal is missing or invalid. This points to a fault in the brake control module or in the CAN wire between it and the transmission.
Mögliche Ursachen
- Break or short on the CAN wire running between the BCM and the transmission module, which may come and go
- Fault in the brake control module (BCM)
Was Sie tun können
- 1Start by reading the fault codes in the CEM and the BCM, and fix those first
- 2Clear the fault code and road test the car to see whether it comes back
- 3With the ignition off, check the CAN wire between the brake control module and the transmission control module for breaks, chafing and loose connectors
- 4If you have diagnostic equipment, follow the speed signal in live data during a road test and check that it updates smoothly
- 5Do not work on the brake system or the brake control module (BCM) yourself; have a workshop carry out the troubleshooting there
Symptome, die Sie bemerken können1
- No noticeable symptoms for the driver
Was der Fehler beeinflussen kann2
- The transmission control module uses a default value for the signal instead of the real speed
- Neutral control is blocked
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.