Zum Inhalt springen
    OBD Tuning
    SENDEN SIE AN UNS
    SENDEN SIE AN UNS
    Startseite
    Fehlercodes
    VOLVO
    TCM-P060668
    VOLVO

    TCM-P060668 - Control module processor. Algorithm Based Failures. Event information

    System

    Getriebesteuergerät (TCM)

    Volvo-Modelle, für die dieser Fehlercode gilt

    Gilt für folgende Modelle:

    9 Modelle

    S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)

    Modelle nach Baujahr und Motor anzeigen (9)
    • Volvo S60 (2011–)2014–2015Nur Getriebe: TG-81SC
    • Volvo S80 (2007–)2014–2015Nur Getriebe: TG-81SC
    • Volvo V40 (2013–)2015Nur Getriebe: TG-81SC
    • Volvo V40 Cross Country (2013–)2015Nur Getriebe: TG-81SC, TG-81SC AWD
    • Volvo V60 (2011–)2014–2015Nur Getriebe: TG-81SC
    • Volvo V60 Cross Country (2015–)2015Nur Getriebe: TG-81SC
    • Volvo V70 (2008–)2014–2015Nur Getriebe: TG-81SC
    • Volvo XC60 (2009–)2014–2015Nur Getriebe: TG-81SC
    • Volvo XC70 (2008–)2014–2015Nur Getriebe: TG-81SC

    Was bedeutet der Fehlercode?

    This is an event-driven information code, and it does not point to a fault in the module where it is active. The transmission control module keeps checking the speed signals and the gearbox output speed, and during braking it checks that they agree. If a fault is found, the gearbox is disconnected into neutral, so that a wrong or locked gear cannot occur.

    Mögliche Ursachen

    • Break or short on the CAN wire running between the BCM and the transmission module, which may come and go
    • Damaged output speed sensor
    • Damaged wheel sensor
    • Internal fault in the transmission control module

    Was Sie tun können

    1. 1Read the fault codes in the brake control module (BCM) and fix them first; then clear the fault code
    2. 2With the ignition off, check the CAN wire between the brake control module and the transmission control module for breaks, chafing and loose connectors
    3. 3Use a multimeter to check that the CAN wire is not shorted to ground or supply voltage
    4. 4Have a workshop check the output speed sensor and wheel sensors with diagnostic equipment, as they are part of the fault check
    5. 5Do not work on the brake system or the wheel sensors yourself; have a workshop carry out the troubleshooting there

    Symptome, die Sie bemerken können1

    • The automatic gearbox shifts harshly or jerkily

    Was der Fehler beeinflussen kann1

    • The gearbox is disconnected into neutral

    Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.

    OBD Tuning

    Schwedens führendes Kompetenzzentrum für Automotorelektronik. Wir bieten professionelle ECU-Optimierung, Steuergerätereparatur und Diagnose mit 12-monatiger Garantie.

    Dienstleistungen

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    Datenbank & Diagnose

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    ECU-Hersteller

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Unternehmen

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    Besuchen Sie uns

    Gjuterigatan 29, Karlstad

    Rufen Sie uns an

    054-830 480

    Schreiben Sie uns eine E-Mail

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle Rechte vorbehalten.