VOLVO
TCM-P060741 - Control Module Performance. System Internal Failures. General checksum failure
System
Getriebesteuergerät (TCM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
9 ModelleS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (9)
- Volvo S60 (2011–)2014–2015Nur Getriebe: TG-81SC
- Volvo S80 (2007–)2014–2015Nur Getriebe: TG-81SC
- Volvo V40 (2013–)2015Nur Getriebe: TG-81SC
- Volvo V40 Cross Country (2013–)2015Nur Getriebe: TG-81SC, TG-81SC AWD
- Volvo V60 (2011–)2014–2015Nur Getriebe: TG-81SC
- Volvo V60 Cross Country (2015–)2015Nur Getriebe: TG-81SC
- Volvo V70 (2008–)2014–2015Nur Getriebe: TG-81SC
- Volvo XC60 (2009–)2014–2015Nur Getriebe: TG-81SC
- Volvo XC70 (2008–)2014–2015Nur Getriebe: TG-81SC
Was bedeutet der Fehlercode?
The transmission control module has registered that communication between its processor and its memory is disturbed or missing. This may be a software fault or an internal fault in the module, and the shifts can then go wrong or stop.
Mögliche Ursachen
- Software fault in the transmission control module
- Internal fault in the transmission control module
Was Sie tun können
- 1Read the fault code and clear it; road test the car to see whether it comes back
- 2Have a workshop reload the transmission software and check that the correct version is installed
- 3Have a workshop replace the transmission control module if the fault remains after the reload; a new module must be programmed
Symptome, die Sie bemerken können5
- Shifting takes too long
- The automatic gearbox shifts harshly or jerkily
- No manual shifting
- Kickdown does not work
- Engine braking does not work as it should
Was der Fehler beeinflussen kann1
- The transmission control module restarts itself
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.