VOLVO
TCM-P060775 - Control Module Performance. Mechanical Failures. Emergency position not reachable
System
Getriebesteuergerät (TCM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
9 ModelleS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (9)
- Volvo S60 (2011–)2014–2015Nur Getriebe: TG-81SC
- Volvo S80 (2007–)2014–2015Nur Getriebe: TG-81SC
- Volvo V40 (2013–)2015Nur Getriebe: TG-81SC
- Volvo V40 Cross Country (2013–)2015Nur Getriebe: TG-81SC, TG-81SC AWD
- Volvo V60 (2011–)2014–2015Nur Getriebe: TG-81SC
- Volvo V60 Cross Country (2015–)2015Nur Getriebe: TG-81SC
- Volvo V70 (2008–)2014–2015Nur Getriebe: TG-81SC
- Volvo XC60 (2009–)2014–2015Nur Getriebe: TG-81SC
- Volvo XC70 (2008–)2014–2015Nur Getriebe: TG-81SC
Was bedeutet der Fehlercode?
The transmission control module has found a fault in one of the shift solenoids, S1 or S2. The fault may be poor contact, a damaged solenoid or a fault in the module, and the gearbox then cannot go into its emergency position.
Mögliche Ursachen
- Contact resistance, oxidation or intermittent contact at the connector to shift solenoid S1 or S2
- Shift solenoid S1 is damaged
- Shift solenoid S2 is damaged
- Software fault in the transmission control module
- Internal fault in the transmission control module
Was Sie tun können
- 1Read the fault code, clear it and road test the car to see whether it comes back
- 2With the ignition off, check the connectors to shift solenoids S1 and S2 for contact resistance, oxidation and loose contact
- 3Have a workshop check the solenoids and wiring with diagnostic equipment and replace the damaged solenoid
- 4If the fault remains after this check, have a workshop reload the transmission software
- 5Do not drive the car when the gearbox is in neutral and will not select a gear; have a workshop check it
Symptome, die Sie bemerken können5
- Shifts too early, too late or too often
- No automatic shifting
- The lock-up function does not work
- No movement forwards or backwards in gear
- The engine stalls at idle when a gear is selected
Was der Fehler beeinflussen kann1
- The gearbox is disconnected into neutral
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.