VOLVO
TCM-P060A68 - Internal Control Module Monitoring Processor Performance. Algorithm Based Failures. Event information
System
Getriebesteuergerät (TCM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
9 ModelleS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (9)
- Volvo S60 (2011–)2014–2015Nur Getriebe: TG-81SC
- Volvo S80 (2007–)2014–2015Nur Getriebe: TG-81SC
- Volvo V40 (2013–)2015Nur Getriebe: TG-81SC
- Volvo V40 Cross Country (2013–)2015Nur Getriebe: TG-81SC, TG-81SC AWD
- Volvo V60 (2011–)2014–2015Nur Getriebe: TG-81SC
- Volvo V60 Cross Country (2015–)2015Nur Getriebe: TG-81SC
- Volvo V70 (2008–)2014–2015Nur Getriebe: TG-81SC
- Volvo XC60 (2009–)2014–2015Nur Getriebe: TG-81SC
- Volvo XC70 (2008–)2014–2015Nur Getriebe: TG-81SC
Was bedeutet der Fehlercode?
This is an event-driven information code, and it does not point to a fault in the transmission control module where it is active. It concerns the checksum of the vehicle speed signal coming from the BCM, or of the gearbox output speed. If the checksum does not agree, the gearbox is disconnected into neutral, so that a wrong or locked gear cannot occur.
Mögliche Ursachen
- Break or short on the CAN wire running between the BCM and the transmission module, which may come and go
- Damaged output speed sensor
- Damaged wheel sensor
- Internal fault in the transmission control module
Was Sie tun können
- 1If the brake control module (BCM) has fault codes, fix them first; then clear this code
- 2With the ignition on, check that the connectors between the brake control module and the transmission sit tight and are free from oxidation
- 3Use a multimeter to check that the CAN wire between them is not shorted to ground or supply voltage
- 4Have a workshop check the wheel sensors and the output speed sensor with diagnostic equipment
- 5Do not work on the brake system or the wheel sensors yourself; have a workshop carry out the troubleshooting there
Symptome, die Sie bemerken können1
- The automatic gearbox shifts harshly or jerkily
Was der Fehler beeinflussen kann1
- The gearbox is disconnected into neutral
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.