VOLVO
TCM-P061000 - Configuration fault in the control module. General fault information. No information about the fault type
System
Getriebesteuergerät (TCM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
1 ModellXC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (1)
Was bedeutet der Fehlercode?
The transmission control module does not have the same configuration as the one the central electronic control module (CEM) sends out on the CAN network. The code can also be set when communication between the transmission and the CEM has been interrupted. It can appear when a used module with different software or hardware has been fitted to the car.
Mögliche Ursachen
- Wrong CAN configuration ID, for example a used module with different software or hardware from what suits the car
- Open circuit in the CAN wires between the transmission control module and the central electronic control module (CEM)
Was Sie tun können
- 1Has a used or otherwise different transmission control module been fitted to the car? It may not suit the car; have a workshop check this
- 2Read the fault codes in all control modules and fix any other communication faults first
- 3With the ignition off, check the CAN wires between the transmission and the CEM for open circuits, chafing and loose connectors
- 4Use a multimeter to check that the CAN wires are not shorted to ground or supply voltage
- 5Have a workshop read and troubleshoot the CAN network with diagnostic equipment and replace the module that communicates incorrectly
Symptome, die Sie bemerken können2
- General warning lamp on
- Missed gear changes
Was der Fehler beeinflussen kann1
- The control module switches to an emergency program
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.