Was bedeutet der Fehlercode TCM-P06B400?

Diagnose und Fehlercodedefinition für TCM-P06B400 (Volvo S60 (2011–), Volvo S60 (2011–), Volvo S60 (2011–)). Steuergerätereparatur bei OBD Tuning.

VOLVO

TCM-P06B400 - Sensor Power Supply B Circuit Low. General Failure Information. No sub type information

System

Getriebesteuergerät (TCM)

Volvo-Modelle, für die dieser Fehlercode gilt

Gilt für folgende Modelle:

7 Modelle

S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–)

Modelle nach Baujahr und Motor anzeigen (24)

Was bedeutet der Fehlercode?

The transmission control module has registered that the voltage to the position sensors for the even gears is too low. The cause may be a supply wire shorted to ground, damaged wires or connectors, or a damaged control module.

Mögliche Ursachen

Supply wire shorted to ground
Damaged wires or connectors
Damaged transmission control module

Was Sie tun können

1Read the fault code, clear it and road test the car to see whether it comes back
2With the ignition off, check the wires and connectors to the position sensors for the even gears for chafing and loose contacts
3Use a multimeter to check that the supply wire has no contact with ground
4If you have diagnostic equipment, read the voltage to the position sensors in live data; if it is outside the normal range the fault most likely lies in the module
5Have a workshop replace the transmission control module or the mechatronic unit if the fault remains; a new module must be programmed

Symptome, die Sie bemerken können5

The malfunction indicator (Check engine) lamp comes on or behaves abnormally
Yellow warning symbol and text message in the display
No automatic shifting
The automatic gearbox shifts harshly or jerkily
Shifting takes too long

Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.