Was bedeutet der Fehlercode TCM-P06B500?

Diagnose und Fehlercodedefinition für TCM-P06B500 (Volvo S60 (2011–), Volvo S60 (2011–), Volvo S60 (2011–)). Steuergerätereparatur bei OBD Tuning.

VOLVO

TCM-P06B500 - Sensor Power Supply B Circuit High. General Failure Information. No sub type information

System

Getriebesteuergerät (TCM)

Volvo-Modelle, für die dieser Fehlercode gilt

Gilt für folgende Modelle:

7 Modelle

S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–)

Modelle nach Baujahr und Motor anzeigen (24)

Was bedeutet der Fehlercode?

According to the transmission control module, the voltage to the position sensors for the even gears is too high. The cause may be a sensor supply wire that has contact with supply voltage, or a damaged transmission control module.

Mögliche Ursachen

Sensor supply wire shorted to supply voltage
Damaged transmission control module

Was Sie tun können

1Clear the fault code and road test the car to see whether it comes back
2With the ignition off, check the wire to the position sensors for the even gears for chafing, damage and loose contacts
3Use a multimeter to check that the wire is not shorted to supply voltage
4If you have diagnostic equipment, compare the voltage to the position sensors in live data with a known reference; a large difference suggests the module
5Have a workshop replace the transmission control module or the mechatronic unit if the fault remains

Symptome, die Sie bemerken können5

The malfunction indicator (Check engine) lamp comes on or behaves abnormally
Yellow warning symbol and text message in the display
No automatic shifting
The automatic gearbox shifts harshly or jerkily
Shifts too early, too late or too often

Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.