VOLVO
TCM-P074A68 - Unable to Engage Gear 2. Algorithm Based Failures. Event information
System
Getriebesteuergerät (TCM)
Volvo-Modelle, für die dieser Fehlercode gilt
Dieser Fehlercode hat je nach Modell, Modelljahr oder Motor unterschiedliche Bedeutungen. Wählen Sie die Bedeutung, die für Ihr Fahrzeug gilt.
Gilt für folgende Modelle:
13 ModelleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (13)
- Volvo C30 (2007–2013)2011–2013Nur Getriebe: TF-80SC
- Volvo C70 (2006–2013)2011–2013Nur Getriebe: TF-80SC
- Volvo S40 (2004–2013)2011–2012Nur Getriebe: TF-80SC
- Volvo S60 (2011–)2014–2015Nur Getriebe: TG-81SC
- Volvo S80 (2007–)2014–2015Nur Getriebe: TG-81SC
- Volvo V40 (2013–)2015Nur Getriebe: TG-81SC
- Volvo V40 Cross Country (2013–)2015Nur Getriebe: TG-81SC, TG-81SC AWD
- Volvo V50 (2004–2013)2011–2012Nur Getriebe: TF-80SC
- Volvo V60 (2011–)2014–2015Nur Getriebe: TG-81SC
- Volvo V60 Cross Country (2015–)2015Nur Getriebe: TG-81SC
- Volvo V70 (2008–)2014–2015Nur Getriebe: TG-81SC
- Volvo XC60 (2009–)2014–2015Nur Getriebe: TG-81SC
- Volvo XC70 (2008–)2014–2015Nur Getriebe: TG-81SC
Was bedeutet der Fehlercode?
This code is event-driven and does not indicate a fault in the control module where it is active. The ratio for 2nd gear is close to that of another gear, which may be due to a solenoid, a clutch part or a mechanical fault in the transmission.
Mögliche Ursachen
- Contact resistance or poor contact in the connectors to the linear pressure solenoids
- A linear pressure solenoid has stuck or is damaged
- Damaged or worn clutch
- Poor fluid quality
- Mechanical faults in the transmission
Was Sie tun können
- 1Read all codes: if there are other transmission codes, deal with them first, since they may be the root fault
- 2Clear the code and road test the car in second gear to see whether it returns
- 3If the fault returns often, tell the workshop how often it happens and how many miles the car has covered
Symptome, die Sie bemerken können5
- Gear changes are harsh or jerky
- No automatic gear change
- Gear changes take a long time
- Gear changes happen too early, too late or too often
- No manual gear change
Was der Fehler beeinflussen kann3
- Adaptation function is blocked
- Neutral check is blocked
- The transmission engages a safe gear and holds it for a while before a new one can be requested
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.