VOLVO
TCM-P076F00 - Gear 7 Ratio Incorrect. General Failure Information. No sub type information
System
Getriebesteuergerät (TCM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
9 ModelleS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (9)
- Volvo S60 (2011–)2014–2015Nur Getriebe: TG-81SC
- Volvo S80 (2007–)2014–2015Nur Getriebe: TG-81SC
- Volvo V40 (2013–)2015Nur Getriebe: TG-81SC
- Volvo V40 Cross Country (2013–)2015Nur Getriebe: TG-81SC, TG-81SC AWD
- Volvo V60 (2011–)2014–2015Nur Getriebe: TG-81SC
- Volvo V60 Cross Country (2015–)2015Nur Getriebe: TG-81SC
- Volvo V70 (2008–)2014–2015Nur Getriebe: TG-81SC
- Volvo XC60 (2009–)2014–2015Nur Getriebe: TG-81SC
- Volvo XC70 (2008–)2014–2015Nur Getriebe: TG-81SC
Was bedeutet der Fehlercode?
Seventh gear gives a ratio that deviates from the expected one. The control module compares the ratio with the value for that gear and finds a difference, which may be caused by a fault in the linear pressure solenoids or a mechanical fault in the transmission.
Mögliche Ursachen
- Contact resistance or poor contact in the connectors to the linear pressure solenoids
- One or more linear pressure solenoids have stuck
- One or more linear pressure solenoids are damaged
- Fault inside the transmission control module (TCM) or its control system
- Mechanical faults in the transmission
Was Sie tun können
- 1First check whether there are other transmission fault codes; they may be the root fault and should be dealt with first
- 2If you have a diagnostic tool: activate the linear pressure solenoids in the tool's test and see whether they click
- 3Have a workshop check the connectors and wiring of the linear pressure solenoids, and the oil quality and level
- 4If no fault is found there, have a workshop look at the transmission's mechanics and the control module
Symptome, die Sie bemerken können5
- Yellow warning symbol and text message in the display
- The malfunction indicator lamp (Check engine) comes on or behaves abnormally
- The car may feel underpowered
- No automatic gear change
- Gear changes happen too early, too late or too often
Was der Fehler beeinflussen kann3
- The control module blocks gears that are not available
- Adaptation function is blocked
- Neutral check is blocked
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.