VOLVO
TCM-P081500 - Upshift Switch Circuit. General Failure Information. No sub type information
System
Getriebesteuergerät (TCM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
9 ModelleS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (17)
- Volvo S60 (2011–)2013Nur Getriebe: TF-80SC, TF-80SC AWD, TF-80SD
- Volvo S60 (2011–)2014–2015Alle Getriebe außer: M66, MMT6, MPS6
- Volvo S80 (2007–)2013Nur Getriebe: TF-80SC, TF-80SC AWD, TF-80SD
- Volvo S80 (2007–)2014–2015Alle Getriebe außer: M66, MMT6, MPS6
- Volvo V40 (2013–)2013–2014Nur Getriebe: TF-80SD
- Volvo V40 (2013–)2015Nur Getriebe: TF-80SD, TG-81SC
- Volvo V40 Cross Country (2013–)2013–2014Nur Getriebe: TF-80SD, TF-80SD AWD
- Volvo V40 Cross Country (2013–)2015Alle Getriebe außer: M66, MPS6
- Volvo V60 (2011–)2013Nur Getriebe: TF-80SC, TF-80SC AWD, TF-80SD
- Volvo V60 (2011–)2014–2015Alle Getriebe außer: M66, MMT6, MPS6
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2013Nur Getriebe: TF-80SC, TF-80SC AWD, TF-80SD
- Volvo V70 (2008–)2014–2015Alle Getriebe außer: M66, MMT6, MPS6
- Volvo XC60 (2009–)2013Nur Getriebe: TF-80SC, TF-80SC AWD
- Volvo XC60 (2009–)2014–2015Nur Getriebe: TF-80SC, TF-80SC AWD, TG-81SC
- Volvo XC70 (2008–)2013Nur Getriebe: TF-80SC, TF-80SC AWD
- Volvo XC70 (2008–)2014–2015Alle Getriebe außer: M66, M66 AWD
Was bedeutet der Fehlercode?
The code concerns the signal from the gear selector control module (GSM) to the steering wheel paddles. The paddles must be activated by pulling them toward the wheel before they can be used for shifting. The code is set when the signal is missing or shown as incorrect, and it may then not be possible to shift with the paddles.
Mögliche Ursachen
- One or both steering wheel paddles are stuck in the pressed position
- One or both steering wheel paddles are stuck in the activated position
- Contact resistance, oxidation or a loose connection in connectors and joints
- Internal fault in the gear selector control module (GSM)
Was Sie tun können
- 1Check that both paddles move freely and return when you release them.
- 2Look for any paddle that is stuck in the pressed or activated position, and remove anything that may be blocking it.
- 3If you have a diagnostic tool: read the steering wheel paddle status in live data and check that it changes when you pull a paddle.
- 4Have a workshop check the connectors and wiring to the steering wheel paddles.
- 5If the paddles and their connectors are in order, have a workshop check the gear selector control module (GSM).
Symptome, die Sie bemerken können1
- Manual gear changes with the steering wheel paddles are not possible
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.