Was bedeutet der Fehlercode TCM-P08608F?

Diagnose und Fehlercodedefinition für TCM-P08608F (Volvo S60 (2011–), Volvo S60 (2011–), Volvo S60 (2011–)). Steuergerätereparatur bei OBD Tuning.

VOLVO

TCM-P08608F - Gear Shift Control Module A Communication Circuit. Bus Signal / Message Failures. Erratic

System

Getriebesteuergerät (TCM)

Volvo-Modelle, für die dieser Fehlercode gilt

Gilt für folgende Modelle:

7 Modelle

S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–)

Modelle nach Baujahr und Motor anzeigen (24)

Was bedeutet der Fehlercode?

The transmission control module (TCM) sends messages to the gear selector control module (GSM), which should reply but does not. The code is set when the GSM fails to answer a message from the TCM. The fault may come from interference on the LIN wire, such as very short, irregular short circuits or breaks.

Mögliche Ursachen

Disturbances on the LIN wire between the selector and the TCM
Very short, irregular short circuits or breaks on the LIN wire

Was Sie tun können

1If you have a diagnostic tool: press the brake, move the selector to M and check that the status changes in live data.
2Inspect the LIN wire for chafing, loose connections and corrosion, especially at the selector.
3Use a multimeter to check that the wire to the selector has good contact at both ends.
4If no fault is found in the wire, have a workshop check the gear selector control module (GSM).

Symptome, die Sie bemerken können1

Manual gear changes are not possible

Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.