VOLVO
TCM-P0B0A68 - Electromagnetic Oil Pump "EMOP" Supply Voltage Circuit Low. Algorithm Based Failures. Event information
System
Getriebesteuergerät (TCM)
Volvo-Modelle, für die dieser Fehlercode gilt
Dieser Fehlercode hat je nach Modell, Modelljahr oder Motor unterschiedliche Bedeutungen. Wählen Sie die Bedeutung, die für Ihr Fahrzeug gilt.
Gilt für folgende Modelle:
9 ModelleS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (9)
- Volvo S60 (2011–)2014–2015Nur Getriebe: TG-81SC
- Volvo S80 (2007–)2014–2015Nur Getriebe: TG-81SC
- Volvo V40 (2013–)2015Nur Getriebe: TG-81SC
- Volvo V40 Cross Country (2013–)2015Nur Getriebe: TG-81SC, TG-81SC AWD
- Volvo V60 (2011–)2014–2015Nur Getriebe: TG-81SC
- Volvo V60 Cross Country (2015–)2015Nur Getriebe: TG-81SC
- Volvo V70 (2008–)2014–2015Nur Getriebe: TG-81SC
- Volvo XC60 (2009–)2014–2015Nur Getriebe: TG-81SC
- Volvo XC70 (2008–)2014–2015Nur Getriebe: TG-81SC
Was bedeutet der Fehlercode?
This fault code is event controlled and does not point to a fault inside the control module; it is designed as information. It shows that the voltage to the electromagnetic oil pump (EMOP) in the transmission has been too low. The pump ensures the right pressure and flow when automatic engine start/stop is active.
Mögliche Ursachen
- Voltage too low in the system
- Contact resistance, oxidation or a loose connection in the connector
- The connector or cable is damaged
- Damaged system relay
- A battery charger giving the wrong voltage was connected
- Damaged battery or damaged generator
Was Sie tun können
- 1The code is informative and does not indicate a fault in the control module, so it does not need to be repaired in itself. Read and note it if you wish
- 2Check that the battery is in good condition and that no charger giving the wrong voltage has been connected
- 3Check that the battery terminals are tight and free from oxidation, and that cables and connectors are undamaged
- 4Have a workshop check the generator and the system relay if the voltage remains too low
Symptome, die Sie bemerken können2
- Automatic engine start/stop does not work while driving
- Automatic engine start/stop does not work at idle
Was der Fehler beeinflussen kann1
- The function for automatic engine start/stop is switched off
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.