VOLVO
TCM-P0C1B68 - Auxiliary Transmission Fluid Pump Control Module Internal Temperature Too High. Algorithm Based Failures. Event information
System
Getriebesteuergerät (TCM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
7 ModelleS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–)
Modelle nach Baujahr und Motor anzeigen (16)
- Volvo S60 (2011–)2012Nur Motor: D5204T3 · Nur Getriebe: TF-80SD
- Volvo S60 (2011–)2013–2014Nur Motor: B5204T8, B5204T9, D5204T3, D5204T7 · Nur Getriebe: TF-80SD
- Volvo S60 (2011–)2015Nur Motor: D5204T3, D5204T7 · Nur Getriebe: TF-80SD
- Volvo S80 (2007–)2012, 2015Nur Motor: D5204T3 · Nur Getriebe: TF-80SD
- Volvo S80 (2007–)2013–2014Nur Motor: D5204T3, D5204T7 · Nur Getriebe: TF-80SD
- Volvo V40 (2013–)2013Alle Motoren außer: B4164T, B4164T3, D4162T · Nur Getriebe: TF-80SD
- Volvo V40 (2013–)2014Alle Motoren außer: B4164T, B4164T3, B4164T4, D4162T · Nur Getriebe: TF-80SD
- Volvo V40 (2013–)2015Nur Motor: B5204T8, B5204T9, D5204T6 · Nur Getriebe: TF-80SD
- Volvo V40 Cross Country (2013–)2013–2014Alle Motoren außer: B4164T, D4162T · Nur Getriebe: TF-80SD, TF-80SD AWD
- Volvo V40 Cross Country (2013–)2015Alle Motoren außer: B4164T, B4204T11, D4162T, D4204T14 · Nur Getriebe: TF-80SD, TF-80SD AWD
- Volvo V60 (2011–)2012Nur Motor: D5204T3 · Nur Getriebe: TF-80SD
- Volvo V60 (2011–)2013–2014Nur Motor: B5204T8, B5204T9, D5204T3, D5204T7, D82PHEV · Nur Getriebe: TF-80SD
- Volvo V60 (2011–)2015Nur Motor: B5204T9, D5204T3, D5204T7, D82PHEV, D87PHEV · Nur Getriebe: TF-80SD
- Volvo V70 (2008–)2012Nur Motor: D5204T3 · Nur Getriebe: TF-80SD
- Volvo V70 (2008–)2013–2015Nur Motor: D5204T3, D5204T7 · Nur Getriebe: TF-80SD
- Volvo XC60 (2009–)2015Nur Motor: B5204T9 · Nur Getriebe: TF-80SD AWD
Was bedeutet der Fehlercode?
The fault code refers to the control module for the electric auxiliary transmission oil pump and states that the temperature in the pump is too high. The code is event controlled and does not indicate a fault in the control module; it is designed as information. The temperature is monitored to protect the pump from excessive load, which can cause internal mechanical faults.
Mögliche Ursachen
- The pump's drive circuit runs too hot
Was Sie tun können
- 1The code is informative and does not indicate a fault in the control module. Read and note it, clear it and drive the car to see if it returns
- 2Have a workshop check the electric oil pump if the code keeps appearing
Symptome, die Sie bemerken können2
- Automatic engine start/stop does not work while driving
- Automatic engine start/stop does not work at idle
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.