Was bedeutet der Fehlercode TCM-P171D00?

Diagnose und Fehlercodedefinition für TCM-P171D00 (Volvo S60 (2011–), Volvo S60 (2011–), Volvo S60 (2011–)). Steuergerätereparatur bei OBD Tuning.

VOLVO

TCM-P171D00 - Shift Fork B Stuck, Movement on Shift Fork D. General Failure Information. No sub type information

System

Getriebesteuergerät (TCM)

Volvo-Modelle, für die dieser Fehlercode gilt

Gilt für folgende Modelle:

7 Modelle

S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–)

Modelle nach Baujahr und Motor anzeigen (24)

Was bedeutet der Fehlercode?

The fault code concerns the wrong shift fork moving: shift fork 4 moves instead of shift fork 2, which has been requested. The hydraulically controlled OEC valve decides whether the odd or even gears are used, and the transmission control module (TCM) has detected the deviation. The fault is general and does not say more precisely what type of fault it is.

Mögliche Ursachen

Damaged OEC valve that controls odd and even gears
Fault in the hydraulic system
Damaged solenoid CSMS1
Damaged solenoid CCFS

Was Sie tun können

1Read and note the fault code, clear it and drive the car to see if it returns
2Have a workshop check the OEC valve and the hydraulic system, and solenoids CSMS1 and CCFS
3If the fault cannot be fixed, have a workshop replace the mechatronic unit. The new control module must be programmed by the workshop

Symptome, die Sie bemerken können5

Check engine light lit or behaving abnormally
Warning symbol and text message in the display
No automatic gear change
Gear changes too early, too late or too often
Gear changes take too long to complete

Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.